| Content | The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
|
|
|
| Pick Up Pattern |
Cardioid |
| Frequency Response |
30 - 17,000 Hz |
| Sensitivity |
2 mV/Pa +/- 3 dB |
| Nominal Impedance |
200 ohms |
| Min Terminating Impedance |
200 ohms |
| Dimensions |
8.375" x 1.875" x 2" |
| Weight |
Approx. 14 oz (385 g) |
|
|
|
Offered in a convenient and cost-effective "three-pack," the Q6 gives you plenty of output and performance for a variety of situations.
3 Mics in a Foam Padded Hard Shell Case
High gain, low impedance design
Dynamic Neodymium mic element
Super Cardioid pickup pattern
Multi-axis shock mounted element
On/Off Switch
Hard Shell Carry Case for 3 mics
(3) Mic Clips included
| · ON-OFF switch
· Male XLR connector
· Anthracite grey body
· Black mesh and antipop filter
· High performance
· High-quality voice reproduction
· Low distortion
· High resistance to knocks
· Special cartridge suspension mount t o isolate the microphone from handling noise
· Ideally suited for singing applications
| Code |
10042 |
| Characteristics |
Dynamic |
| Directivity |
Hyper Cardioid |
| Frequency response |
50÷13 kHz |
| Sensitivity (OdB-1V/micro bar,1000 Hz) |
-72dB±3dB |
| Output impedance |
250 Ohm |
| Material |
Zamak |
| Weight |
359 g |
| Dimensions |
ø 54x187 mm |
| Accessories included |
Stand SU30 |
| Microphone cables (optional) |
CI-M 5 X |
|
CI-M 5 D |
|
CI-M 5 J |
|
The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
|
Reviews
There are no reviews yet.