| Content | Available Options
SV100-W Includes SV100 microphone, on-off switch, XLR-¼" cable, and ¼" adapter
SV100-WA Includes SV100 microphone, on-off switch, XLR-¼" cable, mic clip, threaded adapter, and zippered pouch
The unidirectional (cardioid) pickup pattern of the SV100 helps reduce feedback, while the wide frequency response and high output deliver excellent sound quality.
Ideal for spoken-word presentations, karaoke performances, multimedia, and instrument use, the SV100 includes a durable cable with ¼" (6.3 mm) plug for use with home or portable recording/karaoke systems.
Frequency Range
50–15,000 Hz
Impedance
600 Ohm
Sensitivity
-52 dBV/Pa* at 1kHz
*1 Pa=94 dB SPL
Connector
XLR-¼" (6.3 mm)
Cable Length
15′ (4.5 meters) |
Professional dynamic microphone with On/Off switch. Very robust construction and excellent value-for-money. 4,5 m XLR male / XLR female cable included.
Product type
Microphones
Type
Vocals
Frequency response
80 - 15000lx @ 1m Hz
Directivity
cardioid
Nominal impedance
500 Ohm(s)
Max. SPL (1% THD @ 1kHz)
132 dB
Microphone input
XLR /3-pin, gold plated)
Length
165 mm
Diameter
52 mm
Accessories (included)
XLR / XLR cable, 4.5 m
Weight
0,652 kg
Features
on/off switch, locking |
|
|
|
| Pick Up Pattern |
Cardioid |
| Frequency Response |
30 - 17,000 Hz |
| Sensitivity |
2 mV/Pa +/- 3 dB |
| Nominal Impedance |
200 ohms |
| Min Terminating Impedance |
200 ohms |
| Dimensions |
8.375" x 1.875" x 2" |
| Weight |
Approx. 14 oz (385 g) |
|
|
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
| The Beta 87 microphone has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now features a new design and has been renamed the Beta 87A TM.
In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel when hand-held. In addition, the Beta 87A now includes the A25D break-resistant swivel adapter.
The Shure Model Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level (SPL) capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
- Smooth, tailored frequency response provides detail, accuracy, and warmth for vocals
- Extremely accurate supercardioid pattern at all frequencies provides the highest gain-before-feedback
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
The first Neumann microphone with a dynamic capsule. Functionally optimized design
specifically for the broadcast field, featuring integrated pop protection, suppression of
structure-borne noise and a hypercardioid directional characteristic.
Emotion conveyed with technical perfection. This is the ideal which the Neumann
microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the
requirements of professional broadcast studios and the individual, functionally optimized
design* ensure that these are microphones of character.
The BCM 705 is Neumann?s first dynamic microphone. The housing and headgrille are
identical to those of the BCM 104; only the green logo indicates that this is something new
from Neumann. The principle of reduction to the essentials can be seen in the dynamic
capsule with a hypercardioid directional characteristic, specifically designed for speech
reproduction at close range. Multi-level isolation from structure-borne noise ensures operation
free of interference, even in a lively studio environment.
Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her
individual headgrille. Iin front of the capsule, mounted on a frame holder, a fine gauze serves
as a built-in popscreen.
The microphones of the Broadcast Line have an elastic mount against structure-borne noise,
that is compatible with standard broadcast-segment microphone arms.
Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the
speech intelligibility. The bass frequency response is designed to compensate for the overemphasis
of the bass caused by the proximity effect.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
Mounting
The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio
boom arm.
A thread adapter to fit different connector threads is included. In order to provide protection from
structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.
The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
FEATURES:
Dynamic capsule
Hypercardioid directional characteristic
Characteristic, functionally optimized design*
Integrated, neutral pop protection
Integrated elastic suspension
Individual headgrilles for different users
Colored rings to identify the replacement headgrilles
Easy removal and cleaning of microphone headgrille (with bayonet mount)
Mechanical compatibility with standard studio boom arms
Multi-level isolation from structure-borne noise
No power supply required
APPLICATION HINTS:
Announcer's mic for broadcasting and studio
This is just one of the most common applications. We recommend
additional experimentation to gain maximum use from this microphone.
TECHNICAL DATA:
Acoustical operating principle Pressure gradient transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 10 kohm 1,7 mV/Pa = ?55,4 dB ± 1 dB
Rated impedance 200 ohms
Rated load impedance >= 10,000 ohms
Equivalent SPL CCIR 468-3 32 dB
Equivalent SPL DIN/IEC 651 18 dB-A
S/N ratio CCIR 468-3 62 dB
S/N ratio DIN/IEC 651 76 dB
Weight 500 g
Diameter 64 mm
Length 85 mm
Height (without suspension) 110 mm
|
Reviews
There are no reviews yet.