| Content |
This UHF antenna uses a log periodic dipole array to produce a cardioid pattern toward the desired coverage area, achieving greater rejection of RF signals outside the area than standard ½ wave omnidirectional antennas.
An integrated amplifier with four gain settings compensates for varying degrees of coaxial cable signal loss.
The UA874 can be stand-mounted, suspended from the ceiling, or wall-mounted using the included swivel adapter bracket.
Compatible with all Shure wireless receivers and antenna distribution systems that provide 12 V DC bias
Four-position gain selector switch
Low-noise signal amplifier that compensates for transmission loss in coaxial cable
Integrated threaded adapter that mounts easily to microphones stands
Legendary Shure build quality and reliability
|
Shure PS9E Power Supply for P4HW
- Suitable for the follpwing: T11, LX1, UT1, ULX1, MX1BP, P2R, P4R
- For external power supplies
- Consists of a PS21E power supply + 9V block
|
The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
| Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
| Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | | Tone Signal | 32.768 kHz | | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | | Maximum Input Sound Pressure | 120 dB SPL | | Input Sensitivity Adjustment | Adjustment range: -9 dB to 0 dB (factory preset: 0 dB) | | Microphone Unit | Unidirectional electret condenser microphone | | Frequency Response | 100 Hz - 12 kHz | | Preemphasis | 300 μs | | Input | External microphone input (φ3.5 monaural mini jack) | | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | | Dimensions | 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“) | | Weight | 130 g (0.29 lb) (with battery and strap) | | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Omni-directional antenna with integrated AB 3700 booster |
The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.
| Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | | Power Consumption | 25 W or less | | Input/Output | 4 mixing inputs, 2 distribution outputs | | Band-Pass Frequency | 3.0 - 6.0 MHz | | Gain | 0 dB (±3 dB) | | Infrared Receiver Input | 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals) | | Distribution Output | 75 Ω, BNC jack | | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Case: ABS resin, black | | Dimensions | 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“) | | Weight | 640 g (1.41 lb) (unit only) | | Accessory | AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4 | | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together) |
| 732.2581 |
Reviews
There are no reviews yet.