SHURE WH20XLR Microphone Headset with XLR

• Cardioid polar pattern
• Light wire frame and headband offer a secure, comfortable fit
• Thin, extra strong microphone cable that resists breakage
• Collapsible microphone boom for easy storage and transportation
• Uniform, natural frequency response comparable to high-quality dynamic vocal microphones
• High input clipping level eliminates overload distortion
• Reliable at temperature and humidity extremes
• Three-pin XLR connector with removable belt clip
• Frequency range: 50 Hz - 15 kHz
• Output impedance: 200 O
• Open circuit sensitivity: -67 dBV/Pa (0.45 mV)
• High protection against corrosion
• Incl. cable clip and wind shield
• Weight approx. 100 g

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

Ultra-lightweight headset mic handles high SPL with excellent
fidelity. Low profile design is ideal for high quality
presentations, live or on air. Black. Includes APS911 phantom
power adapter. Requires 9-52 V phantom power.

Specifications

Type
   

Pre-polarized Condenser

Polar Pattern
   

Omni-directional

Frequency Response
   

20Hz - 20kHz

Impedance
   

1000 Ohms

Sensitivity
   

@1k 5 mV/Pa

Features:

* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use

Specifications:

* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)

Shure WCM16 Headworn Condenser Microphone

The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.

 Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.

 The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.

Features:

Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes

Specifications:

Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

Included Accessories

• pop filter,
• clip,
• tool kit,
• anti trauma case,
• mini furry,
• micon cable