Content |
- 1,5'' voice coil Kapton former
- Cone waterproof treatment
- Ferrite magnet circuit
- 88.5 dB sensitivity
|
500 W continuous program power capacity 100° nominal coverage 70 - 18000 Hz response 97dB sensitivity Single Neodymium magnet assembly |
50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression
Compatible with NEXO PS8
- Specifications
- Nominal diameter200 mm (8.0 in)
- Nominal impedance8 Ω
- Minimum impedance6.6 Ω
- Nominal power handling *200 W
- Continuous power handling *400 W
- Sensitivity (1W/1m) *94.0 dB
- Frequency range65 - 3000 Hz
- Voice coil diameter51 mm (2.0 in)
- Winding materialCopper
- Former materialGlass Fibre
- Winding depth17 mm (0.65 in)
- Magnetic gap depth8 mm (0.31 in)
- Flux density1.05 T
- Design
- Surround shapeDouble Roll
- Cone shapeExponential
- Magnet materialNeodymium Inside Slug
- SpiderSingle
- Pole designStraight Pole
- Woofer cone treatmentTWP Waterproof Both Sides
- Recommended enclosure14.0 dm3 (0.49 ft3)
- Recommended tuning65 Hz
- Parameters *
- Fs66 Hz
- Re5.3 Ω
- Qes0.41
- Qms3.6
- Qts0.37
- Vas14.0 dm3 (0.5 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.0 %
- Xmax7.0 mm
- Xvar7.0 mm
- Mms28 g
- Bl12.4 Txm
- Le0.5 mH
- EBP160 Hz
- Mounting And Shipping Info
- Overall diameter225 mm (8.8 in)
- Bolt circle diameter210 mm (8.3 in)
- Baffle cutout diameter187.0 mm (7.4 in)
- Depth90 mm (3.5 in)
- Flange and gasket thickness11 mm (0.4 in)
- Air volume occupied by driver1.1 dm3 (0.04 ft3)
- Net weight1.8 kg (4.0 lb)
- Shipping units1
- Shipping weight2.2 kg (4.8 lb)
- Shipping box300x160x180 mm (11.8x6.3x7.1 in)
|
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
Nominal diameter (mm/in) |
203/8 |
Power Rating (AES, W rms) |
200 |
Nominal impedance (Ω) |
8 |
Voice coil diameter (mm/in) |
50.8/2.0 |
Magnet type |
Neodymium |
Chassis type |
Cast aluminium |
Sensitivity (dB) |
92 |
Frequency range (Hz) |
70-6000 |
Coil material |
Round copper |
Cone material |
Kevlar loaded paper |
Surround material |
Cloth-sealed |
Suspension |
Single |
Xmax (mm/in) |
4/0.16 |
Gap depth (mm/in) |
8.0/0.32 |
Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
D (m/in) |
0.17 |
Fs (Hz) |
80.3 |
Mmd (g/oz) |
22.39 |
Mair |
1.94 |
Qms |
1.33 |
Qes |
0.59 |
Qts |
0.41 |
Re (Ω) |
5.85 |
Vas (lt/ft3) |
11.3/0.399 |
BI (Tm) |
11.22 |
Cms (mm/N) |
0.16 |
Rms (kg/s) |
9.6 |
Le (mH) |
|
Mounting Information
Overall diameter (mm/in) |
225/8.8 |
Overall depth (mm/in) |
100/4.16 |
Cut-out diameter (mm/in) |
187/7.4 |
Mounting slot dimensions (mm/in) |
6.5/0.26 |
Number of mounting slots |
8 |
Mounting slot PCD/ width accross flats |
210/8.3 |
Unit weight (kg/lb) |
1.52/3.34 |
|
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
| The B&C Speakers 8NDL51-16 is an efficient and lightweight cast frame 8" neodymium driver. Its ventilated voice coil gap ensures long term power handling and reduced power compression, and a copper cap on the pole piece reduces inductance and extends high frequency response. The 8NDL51-16 is highly recommended for compact 2-way speaker systems or as the midbass/midrange element in high-output 3-way and 4-way designs.
- Great for line arrays and horn loading
- Neodymium magnet assembly
- Ventilated voice coil gap for reduced power compression
- Inductance-reducing copper cap on pole piece extends HF response
- 2" copper voice coil on polyimide former
- 400 watts continuous program power capacity
- 65 - 3,000 Hz response
|
Reviews
There are no reviews yet.