| Content | 2" voice coil Kapton former Ventilated voice coil to reduce power compression 94.5 dB sensitivity
Professional Woofer Code Z005120
General Specifications
Nominal Diameter: 209mm (8")
Nominal Impedance: 8Ω
Rated Power AES: 130W
Continuous Program Power: 260W
Sensitivity @ 1W/1m: 94.5dB
Voice Coil Diameter: 50mm (2")
Voice Coil Winding Depth: 11mm
Magnetic Gap Depth: 8mm
Flux Density: 1.00T
Magnet Weight: 810g
Net Weight: 2.8kg
Constructive Characteristics
Magnet: Ferrite
Basket Material: Pressed Sheet Steel
Voice Coil Winding Material: Copper
Voice Coil Former Material: Kapton
Cone Material: Paper
Cone Treatment: No
Surround Material: Treated Cloth
Dust Dome Material: Solid Paper
Thiele/Small Parameters
Re: 6.06Ω
Qms: 2.58
Qts: 0.35
Cms: 282µm/N
Vas: 18.2l
X max: +/-3.2mm
η0: 1.28%
Fs: 66.5Hz
Qes: 0.40
Mms: 20.3g
Bxl: 11.30Tm
Sd: 213.8cm2
X var: +/-6.0mm
Le (1kHz): 0.88mH |
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 5.9 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 92 dB
* Frequency Range 80 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.27“, 7 mm
* Flux Density 1.05 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 74 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 8.9 N/A
* Diaphragm Mass inc. Airload (Mms) 23 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2 Kg/s
* Electromagnetic Q (Qes) 0.69
* Mechanical Q (Qms) 5.30
* Total Q (Qts) 0.61
* Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
* Surface Area of Cone (Sd) 27.5“², 177.3 cm²
* Maximum Linear Excursion (Xmax)* 8.48 mm
* Xdamage** 12.9 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 21.6 g
* Eta Zero 0.5 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
- 94 dB sensitivity 1 W / 1 m
- 250 W Power handling
- 2" voice coil
- Double treated cone for water protection
- Neodymium magnet system
- Tripie aluminum demodulating rings for ultra low distortion
- Optimal for compact 2-way systems
- Light weight carbon fibre diaphragm
|
50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression
Compatible with NEXO PS8
- Specifications
- Nominal diameter200 mm (8.0 in)
- Nominal impedance8 Ω
- Minimum impedance6.6 Ω
- Nominal power handling *200 W
- Continuous power handling *400 W
- Sensitivity (1W/1m) *94.0 dB
- Frequency range65 - 3000 Hz
- Voice coil diameter51 mm (2.0 in)
- Winding materialCopper
- Former materialGlass Fibre
- Winding depth17 mm (0.65 in)
- Magnetic gap depth8 mm (0.31 in)
- Flux density1.05 T
- Design
- Surround shapeDouble Roll
- Cone shapeExponential
- Magnet materialNeodymium Inside Slug
- SpiderSingle
- Pole designStraight Pole
- Woofer cone treatmentTWP Waterproof Both Sides
- Recommended enclosure14.0 dm3 (0.49 ft3)
- Recommended tuning65 Hz
- Parameters *
- Fs66 Hz
- Re5.3 Ω
- Qes0.41
- Qms3.6
- Qts0.37
- Vas14.0 dm3 (0.5 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.0 %
- Xmax7.0 mm
- Xvar7.0 mm
- Mms28 g
- Bl12.4 Txm
- Le0.5 mH
- EBP160 Hz
- Mounting And Shipping Info
- Overall diameter225 mm (8.8 in)
- Bolt circle diameter210 mm (8.3 in)
- Baffle cutout diameter187.0 mm (7.4 in)
- Depth90 mm (3.5 in)
- Flange and gasket thickness11 mm (0.4 in)
- Air volume occupied by driver1.1 dm3 (0.04 ft3)
- Net weight1.8 kg (4.0 lb)
- Shipping units1
- Shipping weight2.2 kg (4.8 lb)
- Shipping box300x160x180 mm (11.8x6.3x7.1 in)
|
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
- 93 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Sandwich Voice Coil
- Single Point Source providig coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2- or 3-way Systems
|
Reviews
There are no reviews yet.