SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1”

20%
All products by SICA Speakers
(0 customer reviews)

€18.44 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: Z009040C Category:
1\’\’ voice coil aluminium fprmer Treated silk dome Ferrofluid in the air gap Ferrite magnet circuit 89.8 dB sensitivity GENERAL SPECIFICATIONS: Nominal Diameter: 85 mm Nominal Impedance: 8 Ω Program Power: 40 Watt Rated Power: 20 Watt Voice Coil Diameter 25 mm Sensitivity @ 1W/1m 89,8 dB Flux Density: 1,06 T Netto Weight: 0,260 Kg […]

 

Read more

  • 1\’\’ voice coil aluminium fprmer
  • Treated silk dome
  • Ferrofluid in the air gap
  • Ferrite magnet circuit 89.8 dB sensitivity

GENERAL SPECIFICATIONS:
Nominal Diameter: 85 mm
Nominal Impedance: 8 Ω
Program Power: 40 Watt
Rated Power: 20 Watt
Voice Coil Diameter 25 mm
Sensitivity @ 1W/1m 89,8 dB
Flux Density: 1,06 T Netto
Weight: 0,260 Kg

Manual

Weight 0.26 kg

Reviews

There are no reviews yet.

Show reviews in all languages (1)

Be the first to review “SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1””

Your email address will not be published. Required fields are marked *

Quick Comparison

SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1'' removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeB & C Speakers DE-400TN 100 W, 1” horn, Titanium diaphragm remove
NameSICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1'' removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-12 Driver 106,5dB 16ohm removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M removeB & C Speakers DE-400TN 100 W, 1” horn, Titanium diaphragm remove
ImageB & C Speakers DE-12 Driver 40WRMS, 106,5dB 16ohm
SKUZ009040CDE-16DE-12 16DE-1000WG-400DE-400TN
Rating
Price €18.44 incl. GR VAT €99.20 incl. GR VAT €74.76 incl. GR VAT €524.22 incl. GR VAT €243.99 incl. GR VAT €179.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

In stock

Only 2 left in stock (can be backordered)

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderIn stockIn stockOnly 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 50 W continuous program power capacity
  • 1" horn throat diameter
  • 36 mm (1.4 in) aluminium voice coil
  • Polyester diaphragm
  • 1500 - 18000 Hz response
  • 106 dB sensitivity
Content
  • 1\'\' voice coil aluminium fprmer
  • Treated silk dome
  • Ferrofluid in the air gap
  • Ferrite magnet circuit 89.8 dB sensitivity

GENERAL SPECIFICATIONS:
Nominal Diameter: 85 mm
Nominal Impedance: 8 Ω
Program Power: 40 Watt
Rated Power: 20 Watt
Voice Coil Diameter 25 mm
Sensitivity @ 1W/1m 89,8 dB
Flux Density: 1,06 T Netto
Weight: 0,260 Kg

Manual

DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

General
Product type Compression driver
Brand B&C Speakers
Reference DE12
Product code DRV01216

Informations
Nominal impedance 16 ohm
Dimensional category 3.5 inch
Manufacturer sensitivity 106 dB
Nominal power handling 20 W
Bandwidth 1500÷18000 Hz
Recommended min cutoff frequency 2200 Hz
Exit dimension 1.0 inch

Fundamental parameters
Le 0.19 mH

Datas
Flux density 1.45 T
Zmin 10.9 ohm
Weight ~1 kg

Dimensions
Voice coil diameter 1.4 inch
Outside diameter 90 mm
Depth 49 mm
Driver dimensions mouting holes 5.0 mm
Driver mounting system 2 points on diameter 76 mm

Shape & Materials
Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Polyester
280 W continuous program power capacity
1.5” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
Line Array optimized Waveguide
140° max horizontal coverage
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coilm (3 in) aluminium voice coil
Polyimide diaphragm
1200 – 18000 Hz response
108.5 dB sensitivity
Compact Neodymium magnet assembly
DE400TN
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1200 – 18000 Hz response
106 dB sensitivity
Compact Neodymium magnet assembly
Shorting copper cap for extended HF response
Weight0.26 kg1.70 kg1.5 kg3.40 kg1.30 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.26 kg
Weight 1.70 kg
Weight 1.5 kg
Weight 3.40 kg
Weight 1.30 kg
Weight 5.00 kg

Related products