SOUND DEVICES MixPre-6 Digital recorder/Usb interface

Frequency Response10Hz to 80kHz +/- 0.5dB re 1kHz @ 192kHz sample rate THD + Noise0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in) ADC32 bit precision; 120dB dynamic range min (A-weighted, gain=10dB, fader=0dB) Equivalent Input Noise-130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance) Inputs

• Mic: XLR active-balanced; 4k input Z
• Line: XLR active-balanced; 4k input Z
• Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input Z
• Line: ¼-inch TRS active-balanced; 4k input Z
• USB Audio: 4 channels
• All inputs fully RF-filtered and overload protected.

• Mic input: +6dB to +76dB
• Line input: -20dB to +30dB
• Fader: -inf to +20dB
• Headphone: -inf to +20dB
• Total, Mic-to-recording (max): +96dB
• Aux In (Mic): Gain = +10dB to +40dB
• Aux In (Line): Gain = -10dB to +20dB
• Total Aux Gain including Fader (Mic-to-recording): +60dB

• Mic XLR: +14dBu (limiters on or off)
• Line XLR/¼-inch: +40dBu (limiters on or off)
• Aux In (Mic): -10dBu
• Aux In (Line): +10dBu

• Mic XLRs: 48V via 6.8k resistors, 10mA each
• Mic 3.5mm: 3V @ 3k source Z

• Audio Interface (USB-C): 8-in/4-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed or ASIO (supplied)
• Mass Storage (USB-C): USB 2.0 high speed
• Keyboard (USB-A): Text entry and control

• 44.1 kHz
• 48 kHz
• 96 kHz
• 192 kHz

• Type: SD, SDXC, SDHC Card
• Max Storage Size: 512 GB (SDXC)
• Card format: FAT32 (32GB or less) or exFAT (>32GB)

• Time of Day (file stamped w/current ToD)
• LTC Input (file stamped w/incoming LTC on Aux 3.5mm)
• HDMI TC (file stamped w/incoming TC from HDMI & sample clock slaved from HDMI sample clock. Only works on specific cameras that support HDMI TC.

• Auto-detects (fps): 23.98 (same as 23.976)
• 24
• 25
• 29.97
• 29.97DF
• 30

• Bluetooth Smart: Wireless control using Wingman app
• HDMI: Auto-record start/stop trigger from cameras that output record flag over HDMI
• Timecode: Auto-record start/stop trigger via Aux In timecode

• AA Batteries: 4x AA sled (included); 8x AA sled (optional accessory). NiMH recommended
• From computer: Bus-powered via USB-C port; use MX-USBY cable (included), connects one USB-C to two USB-A ports
• AC Adapter: MX-Charge (not included) Power supply wall adapter w/ USB-C connector; 15W; has 4 adapter plugs for US, UK, AU & Europe
• L-Mount: Optional sled for 2x (hot-swappable) Sony L-type Li-ion batteries

• Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)
• Storage: -40°C to 85°C

• Dimensions: 166 mm x 118 mm x 36 mm (H x W x D); 6.53” x 4.65” x 1.40”
• Weight: .56 kg; 19.9 oz. (unpackaged, without batteries)

Specifications are subject to change without prior notice.

Liquid Mix HDLiquid Mix HD | TDM Plugin for Pro Tools HD

Key Features
Variety of Classic Emulations
40 compressors and 20 EQs, sampled from vintage originals with a free expanding library online.
Dynamic Convolution Technology
The unique patented Dynamic Convolution process delivers unparalleled EQ and Compression emulations.
Ultra-Low Latency for Recording
With the ultra-low latency of Liquid Mix HD (just 12 samples), it can now be used for recording and live sound applications
Optimised for Pro Tools HD
Over one hundred simultaneous mono instances can be run at 44.1/48kHz on an HD3 system.
Full Control Surface Mapping
Pro Tools TDM format ensures full control mapping on all major Pro Tools control surfaces, including ICON and VENUE.
Unique Hybrid Super EQ
Create your own totally unique 7-band super EQ, built out of separate classic EQ bands.
Compressor 'Free' Mode
Vintage compressors with limited controls can now be set to provide fully variable Attack, Release and Ratio.
Automation and Full Recall
Perfect integration with Pro Tools HD allows for automation of parameters and full recall within your session.

• Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
• Recording format

• Number of channels: 4-channel (stereo × 2, mono × 4)
• Analog audio input

• Set to "LINE“

• 1/2 connector

• CAMERA IN connector

• LINE OUT connector

• CAMERA OUT connector

• PHONES connector

• REMOTE Connector: 2.5mm TRS jack
• Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
• Power consumption: 5.0W
• Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
• Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
• Weight: 625g ( including batteries) / 530g (without batteries )

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal


•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

• Support for PAL, NTSC and 60 Hz B&W standards
• One composite video input and three composite video outputs
• Can operate as a master black-burst generator
• Can operate as genlocking slave device

* 8-track Digital Portastudio with CD Burner
* Records to SD/SDHC Card media
* Import audio tracks from CD
* Built-in stereo condenser microphone
* Two XLR microphone inputs with phantom power
* 1/4" stereo line inputs
* Switchable instrument-level input for guitar/bass direct recording
* Multi-band mastering effects
* 2-band EQ per track
* Internal reverb processor with dedicated send per track
* Chromatic Tuner and Metronome
* Track editing, autopunch and bounce features
* Optional RC-3F footswitch offers three switches for punch-in and transport operation
* Compact and lightweight
* Dimensions: 11.4" W x 2.1" H x 8.2" D
* Weight: 4lbs