SOUND DEVICES MixPre-3 Digital recorder/Usb interface

Frequency Response10Hz to 40kHz +/- 0.5dB re 1kHz @ 96kHz sample rate THD + Noise0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in) ADC32 bit precision; 120dB dynamic range min (A-weighted, gain=10dB, fader=0dB) Equivalent Input Noise-130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance) Inputs

• Mic: XLR active-balanced; 4k input Z
• Line: XLR active-balanced; 4k input Z
• Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input Z
• USB Audio: 2 channels
• All inputs fully RF-filtered and overload protected.

• Mic input: +6dB to +76dB
• Line input: -20dB to +30dB
• Fader: -inf to +20dB
• Headphone: -inf to +20dB
• Total, Mic-to-recording (max): +96dB
• Aux In (Mic): Gain = +10dB to +40dB
• Aux In (Line): Gain = -10dB to +20dB
• Total Aux Gain including Fader (Mic-to-recording): +60dB

• Mic XLR: +14dBu (limiters on or off)
• Line XLR: +40dBu (limiters on or off)
• Aux In (Mic): -10dBu
• Aux In (Line): +10dBu

• Mic XLRs: 48V via 6.8k resistors, 10mA each
• Mic 3.5mm: 3V @ 3k source Z

• Audio Interface (USB-C): 5-in/2-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant USB 2.0 high speed or ASIO (supplied)
• Mass Storage (USB-C): USB 2.0 high speed
• Keyboard (USB-A): Text entry and control

• 44.1 kHz
• 48 kHz
• 96 kHz

• Type: SD, SDXC, SDHC Card
• Max Storage Size: 512 GB (SDXC)
• Card format: FAT32 (32GB or less) or exFAT (>32GB)

• Time of Day (file stamped w/current ToD)
• LTC Input (file stamped w/incoming LTC on Aux 3.5mm)
• HDMI TC (file stamped w/incoming TC from HDMI & sample clock slaved from HDMI sample clock. Only works on specific cameras that support HDMI TC.

• Auto-detects (fps): 23.98 (same as 23.976)
• 24
• 25
• 29.97
• 29.97DF
• 30

• Bluetooth Smart: Wireless control using Wingman app
• HDMI: Auto-record start/stop trigger from cameras that output record flag over HDMI
• Timecode: Auto-record start/stop trigger via Aux In timecode

• AA Batteries: 4x AA sled (included); 8x AA sled (optional accessory). NiMH recommended
• From computer: Bus-powered via USB-C port; use MX-USBY cable (included), connects one USB-C to two USB-A ports
• AC Adapter: MX-Charge (not included) Power supply wall adapter w/ USB-C connector; 15W; has 4 adapter plugs for US, UK, AU & Europe
• L-Mount: Optional sled for 2x (hot-swappable) Sony L-type Li-ion batteries

• Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)
• Storage: -40°C to 85°C

• Dimensions: 144 mm x 110 mm x 36 mm (H x W x D); 5.68” x 4.35” x 1.40”
• Weight: .48 kg; 16.8 oz. (unpackaged, without batteries)

Specifications are subject to change without prior notice.

Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware.

• Primary HD port for connecting directly to HD Core or Accel cards.
• Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
• Compatible with the latest versions of ProTools
• May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
• Please note: Not compatible with Pro Tools|HD Native

The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C's 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.

Main Features

    * Colour TFT touch screen interface
    * 20 illuminated flash start keys

    * Up to 100 tracks available for flash start through touch screen
    * Transport and Online buttons recessed to prevent accidental operation
    * 100-mm fader with fader start capability and 0-dB lock
    * Monitor speaker and headphones output for monitoring
    * CAT6 connection to HS-2 and HS-8

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal


•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

• Support for PAL, NTSC and 60 Hz B&W standards
• One composite video input and three composite video outputs
• Can operate as a master black-burst generator
• Can operate as genlocking slave device

RS-422 PROTOCOL CONVERTER