Sound Devices-MixPre D

1,300.75 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Transformer-balanced mic/line selectable inputs 48-volt or 12-volt phantom power “Unclippable” input peak limiters, dual- mono or stereo linked operation Input panning to Left, Center or Right outputs Mid-Side Stereo (MS) matrix with width control and front-panel channel flip Return can be used as ch3/ch4 aux-level inputs, selectable pan and level control High-pass filters, 80 Hx […]

 

Read more

  • Transformer-balanced mic/line selectable inputs
  • 48-volt or 12-volt phantom power
  • “Unclippable” input peak limiters, dual- mono or stereo linked operation
  • Input panning to Left, Center or Right outputs
  • Mid-Side Stereo (MS) matrix with width control and front-panel channel flip
  • Return can be used as ch3/ch4 aux-level inputs, selectable pan and level control
  • High-pass filters, 80 Hx or 160 Hz
  • Slate microphone and tone oscillator
  • Mic/Line/AES digital selectable outputs, digital SR of 44.1k, 48k, 96k
  • USB streaming audio output for interconnection with Mac® OS, Windows®, Linux and iOS devices
  • Dedicated mic-level output on locking TA3 connector for unbalanced camera inputs
  • Headphone monitoring of program audio or external return audio
  • Sunlight-viewable, 16-segment GaN LED output meter with adjustable brightness
  • Internal battery-power from two AA
  • External power input, 10-17 VDC
  • High-strength, extruded aluminum chassis with metal connectors
Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “Sound Devices-MixPre D”

Your email address will not be published. Required fields are marked *

Quick Comparison

Sound Devices-MixPre D removeBEHRINGER UCA222 Ultra-low latency 2-In/2-Out USB audio interface with digital output removeEDIROL UA-1G USB AUDIO INTERFACE removeEDIROL FA-66 24Bit/192kHz FireWire Audio Capture removeMOTU Traveler-mk3 - Portable bus-powered audio interface with on-board effects and mixing removeMOTU 828mk3 - FireWire audio interface with on-board effects and mixing remove
NameSound Devices-MixPre D removeBEHRINGER UCA222 Ultra-low latency 2-In/2-Out USB audio interface with digital output removeEDIROL UA-1G USB AUDIO INTERFACE removeEDIROL FA-66 24Bit/192kHz FireWire Audio Capture removeMOTU Traveler-mk3 - Portable bus-powered audio interface with on-board effects and mixing removeMOTU 828mk3 - FireWire audio interface with on-board effects and mixing remove
Image
SKUMixPre DE005368UA-1GFA66Traveler-mk3828mk3
Rating
Price1,300.75 incl. GR VAT 29.94 incl. GR VAT 103.90 incl. GR VAT 366.83 incl. GR VAT836.75 incl. GR VAT884.12 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Transformer-balanced mic/line selectable inputs
  • 48-volt or 12-volt phantom power
  • “Unclippable” input peak limiters, dual- mono or stereo linked operation
  • Input panning to Left, Center or Right outputs
  • Mid-Side Stereo (MS) matrix with width control and front-panel channel flip
  • Return can be used as ch3/ch4 aux-level inputs, selectable pan and level control
  • High-pass filters, 80 Hx or 160 Hz
  • Slate microphone and tone oscillator
  • Mic/Line/AES digital selectable outputs, digital SR of 44.1k, 48k, 96k
  • USB streaming audio output for interconnection with Mac® OS, Windows®, Linux and iOS devices
  • Dedicated mic-level output on locking TA3 connector for unbalanced camera inputs
  • Headphone monitoring of program audio or external return audio
  • Sunlight-viewable, 16-segment GaN LED output meter with adjustable brightness
  • Internal battery-power from two AA
  • External power input, 10-17 VDC
  • High-strength, extruded aluminum chassis with metal connectors
U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle Behringer U-Control UCA202
  • 2 In/2 Out USB Audio Interface
  • Mac or PC, no drivers required
  • 16-bit/48kHz converters
  • Low latency
  • Headphone output
  • S/PDIF optical out
  • USB powered
  • Free Software
  • Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
  • Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
  • Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
  • Works with your PC or Mac computer—no setup or drivers required
  • High-resolution 48 kHz converters for high-end audio quality
  • Stereo Headphone output with dedicated Level control lets you monitor both input and output
  • Additional S/PDIF optical output for direct digital conversion
  • Powered via USB—no external power supply needed
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications. High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222. Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution. Super Simple Setup As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware. The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer.

The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.

  • Stereo input and output at 24-bit/96kHz audio quality
  • High-end A/D and D/A converters for accurate recording and playback
  • Large Input Level knob for easy control while recording
  • 1/4" jack with Hi-Z option for recording electric guitar or bass
  • Electret condenser mic input
  • RCA phono type and optical-digital audio I/O
  • Headphone output
  • USB powered – no AC adapter required
  • SONAR LE for music recording, editing, and publishing on PC
  • Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support

  • Number of Audio Record/Playback ChannelsRecord: 1 pair of stereo
    Play: 1 pair of stereo
    REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting)
    REC SOURCE switch = DIGITAL: Recording only
    Signal ProcessingPC interface: 24 bits
    AD/DA Conversion: 24 bits (linear)
    * ADVANCE DRIVER switch = OFF: 16 bits
    Sampling FrequencyDigital output: 32/44.1/48/96 kHz
    Digital input: 32/44.1/48/96 kHz
    AD/DA Conversion: 32/44.1/48/96 kHz
    * ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
    Nominal Input LevelLine input jacks: -10 to +4 dBu
    Guiter input jakcs: -30 to -16dBu
    Mic input jack: -40 to -26 dBu
    Nominal Output LevelLine output jacks: -10 dBu
    InterfaceUSB Digital input (Optical mini type)
    * The same jack serves as both the Mic Input jack and digital input connector.
    Digital output (Optical mini type)
    * The same jack serves as both the headphones jack and digital output connector.
    * conforms to IEC60958 consumer format.
    ControllersADVANCED DRIVER Switch
    Guiter/Mic Switch
    INPUT VOLUME knob
    PHONES VOLUME Dial
    SAMPLE RATE Switch
    96kHz MODE Switch
    INPUT MONITOR Switch
    REC SOURCE Switch
    ConnectorsUSB Connector (B type)
    Line Input jacks (L, R) (RCA phono type)
    Line Output jacks (L, R) (RCA phono type)
    Guiter/Mic Input jack: (1/4 inch phone type)
    Mic Input jack (Plug-in powered miniature phone type)
    Digital Intput connector (Optical mini type)
    * The same jack serves as both the headphones jack and digital output connector.
    Headphones jack (Stereo miniature phone type)
    Digital Output connector (Optical mini type)
    * The same jack serves as both the Mic Input jack and digital input connector.
    Power SupplySupplied from the computer
    Current Draw200 mA
    AccessoriesOwnerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM
    Size and Weight
    Width
    160 mm6-5/16 inches
    Depth
    58 mm2-5/16 inches
    Height
    28 mm1-1/8 inches
    Weight
    165 g0 lbs. 6 oz.




The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.

    * 6-in/6-out 24-bit/96kHz simultaneous performance
    * 4-in/4-out 24-bit/192kHz simultaneous performance
    * 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
    * +4 dB balanced input and output
    * S/PDIF optical input & output ports with Sync LED indicator
    * MIDI in/out ports
    * Built-in analog limiter and indicator
    * FireWire bus powered
    * AC adaptor included
    * Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
    * Zero-latency Direct Monitoring
    * 6-pin and 4-pin IEEE1394 ports
    * Compact, solid-metal construction

 

The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.

The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.

Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.

The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

Weight0.70 kg0.20 kg0.16 kg0.70 kg4.00 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.20 kg
Weight 0.16 kg
Weight 0.70 kg
Weight 4.00 kg
Weight 4.00 kg