Sound Devices-USB Pre2 – Microphone interface

1,227.59 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad. Dynamic range greater than 114 dB (in 24-bit operation). Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics. Each input individually selectable between microphone, line, and aux level signals (both channels selected […]

 

Read more

  • Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
  • Dynamic range greater than 114 dB (in 24-bit operation).
  • Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
  • Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
  • Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
  • High-output headphone amplifier can drive a wide range of headphones.
  • Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
  • Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon
  • Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
  • Bus powering via USB for convenient, single-cable connection to the computer.
  • In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
  • Hardware loop-through for test and measurement to send computer audio directly back to an input.
  • High-strength extruded aluminum chassis.
  • Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
  • Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “Sound Devices-USB Pre2 – Microphone interface”

Your email address will not be published. Required fields are marked *

Quick Comparison

Sound Devices-USB Pre2 - Microphone interface removeEDIROL UA-20 USB AUDIO AND MIDI removeDIGIDESIGN Pro Tools Mbox Pro USB SOUND INTERFACE 4X4 removeESI U-46XL USB Sound Card removeDIGIDESIGN Pro Tools Mbox Mini USB EXTERNAL SOUND CARD 2X2 removeBEHRINGER UCA222 Ultra-low latency 2-In/2-Out USB audio interface with digital output remove
NameSound Devices-USB Pre2 - Microphone interface removeEDIROL UA-20 USB AUDIO AND MIDI removeDIGIDESIGN Pro Tools Mbox Pro USB SOUND INTERFACE 4X4 removeESI U-46XL USB Sound Card removeDIGIDESIGN Pro Tools Mbox Mini USB EXTERNAL SOUND CARD 2X2 removeBEHRINGER UCA222 Ultra-low latency 2-In/2-Out USB audio interface with digital output remove
Image
SKUUSB Pre 2UA-20ProTools Mbox ProJ08ES00028Pro Tools Mbox MiniE005368
Rating
Price1,227.59 incl. GR VAT 159.06 incl. GR VAT 797.57 incl. GR VAT 119.00 incl. GR VAT 321.41 incl. GR VAT 29.94 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
  • Dynamic range greater than 114 dB (in 24-bit operation).
  • Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
  • Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
  • Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
  • High-output headphone amplifier can drive a wide range of headphones.
  • Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
  • Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon
  • Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
  • Bus powering via USB for convenient, single-cable connection to the computer.
  • In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
  • Hardware loop-through for test and measurement to send computer audio directly back to an input.
  • High-strength extruded aluminum chassis.
  • Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
  • Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.

UA-20: Audio Capture USB Audio/MIDI Interface Features

The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.

  • Audio and MIDI in a compact unit.
  • Fully equipped with I/O jacks.
  • Great tool for creating music.
  • Edirol's FPT Technology.

Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.

System Requirements
Mac           PC

    * Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One FireWire port

         

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One FireWire port

Compatibility

ASIO, Core Audio, WDM, MME, and multi-client drivers

Mbox Pro Hardware
Pro Tools Mbox Pro

Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.

    * Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
    * FireWire connection
    * Professional-grade circuitry and converters deliver exceptional audio performance
    * Up to 24-bit, 192 kHz sample rates*
    * Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
    * Built-in guitar tuner
    * Onboard DSP offers flexible cue mixing and reverb effects
    * Assignable Pro Tools multi-function button on interface gives you fast access to software functions
    * Connect up to three pairs of monitors or do 5.1 surround mixing**
    * Hardware configuration:
          o 8 x 8 simultaneous channels of I/O
          o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
          o 4 1/4" TRS line inputs
          o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
          o 6 1/4" TRS balanced line outputs
          o 2 discrete 1/4” stereo headphone outputs with separate volume controls
          o Stereo S/PDIF digital I/O
          o 1 MIDI input, 1 MIDI output
          o Word clock I/O
          o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
          o Dedicated monitor volume knob

* Up to 96 kHz sample rates supported with Pro Tools LE software.

** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software

The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.

Key Features

    * Award-winning Pro Tools recording, editing, and mixing
    * 48 simultaneous stereo audio tracks (expandable with Toolkit options)
    * Includes over 70 professional effects and virtual instruments
    * Professional MIDI sequencing with dedicated MIDI Editor window
    * Integrated Score Editor based on award-winning Sibelius notation software
    * Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
    * Unique Beat Detective LE automatic groove analysis and correction tool
    * ReWire support for streaming your favorite applications right into Pro Tools
    * Huge selection of compatible third-party plug-ins and software options
    * Works on Windows and Mac computers

he U46XL is a powerful multi-purpose 4-in 6-out multi-channel audio interface designed for various recording applications at home or on the road. The U46XL is the successor of to ESI Audio's famous U46DJ interface.

As its predecessor, it provides 2 stereo line inputs, a microphone input with +48V phantom power and a headphone output. A main difference is the improved analog circuitry improving the audio quality as well as the professional microphone preamplifier with XLR input. This makes the U46XL the perfect solution to record signals from dynamic or condenser microphones on the road or in your studio.

The unit also features an instrument input (Hi-Z), typically to connect a guitar directly to it. Two totally separate stereo line input on the backside provide 4 simultaneously usable input channels at one time. There are also 6 independent individual outputs on the backside, perfect for multi-channel playback applications like to provide individual outputs for software synthesizers, to provide independent playback channels for DJ software or to provide surround playback capability via a 5.1 setup. A separate mix output with professional TRS outputs could be used to connect U46XL to professional stereo studio monitors.

A cool feature is the DirectWIRE support in the driver, allowing you to record signals from one application to another internally. U46XL works with this driver based on our EWDM technology under Windows XP and Windows Vista/7, however U46XL is also Mac OS X compatible.

U46XL ships with Cubase LE 4 from Steinberg for Mac and PC to start recording on a professional level right out of the box.

Weight0.50 kg0.60 kg2.00 kg1.36 kg1.50 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.60 kg
Weight 2.00 kg
Weight 1.36 kg
Weight 1.50 kg
Weight 0.20 kg