| Content |
- Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
- Dynamic range greater than 114 dB (in 24-bit operation).
- Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
- Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
- Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
- High-output headphone amplifier can drive a wide range of headphones.
- Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
- Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon
- Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
- Bus powering via USB for convenient, single-cable connection to the computer.
- In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
- Hardware loop-through for test and measurement to send computer audio directly back to an input.
- High-strength extruded aluminum chassis.
- Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
- Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.
|
Features:
USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out
Technical Specifications
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3kΩ balanced
Phantom Power: +48 Volts
Maximum gain: +58 dB
E.I.N. (at max gain): -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level: +21 dBu at minimum gain
Frequency Response: +0/-1 dB, 20Hz - 20kHz
THD+N: +18 dBu maximum
Impedance: 32Ω Balanced, 16Ω Unbalanced
Headphone Output: 1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements: 12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU
|
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One FireWire port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One FireWire port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers
Mbox Pro Hardware
Pro Tools Mbox Pro
Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* FireWire connection
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 192 kHz sample rates*
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Connect up to three pairs of monitors or do 5.1 surround mixing**
* Hardware configuration:
o 8 x 8 simultaneous channels of I/O
o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
o 4 1/4" TRS line inputs
o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
o 6 1/4" TRS balanced line outputs
o 2 discrete 1/4” stereo headphone outputs with separate volume controls
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Word clock I/O
o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
o Dedicated monitor volume knob
* Up to 96 kHz sample rates supported with Pro Tools LE software.
** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
| U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle
Behringer U-Control UCA202
- 2 In/2 Out USB Audio Interface
- Mac or PC, no drivers required
- 16-bit/48kHz converters
- Low latency
- Headphone output
- S/PDIF optical out
- USB powered
- Free Software
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Works with your PC or Mac computer—no setup or drivers required
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB—no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple Setup
As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer. |
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
| Dimensions | Width | 170mm (6-3/4“) | | Height | 59mm (2-3/8“) | | Depth | 192mm (7-5/8“) | | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
| Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
| Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
| Connectivity | Headphones | Stereo Phone connector x 1 | | Microphone | Mic/Hi-Z input x 2 | | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | | LINE OUT | Phone connector x 2 (L, R) | | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
| Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | | Memory | More than 1 GB More than 128 MB | | Macintosh | PC | Macintosh computer with built-in USB interface | | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | | Support OS | Mac OS X 10.3.3 or higher | | Memory | More than 128 MB |
Accessories | Included Accessories | Cable | USB Cable | | Others | CUBASE AI DVD, Owners Manual |
|
Reviews
There are no reviews yet.