| Content |
| 700 W continuous program power capacity |
|
| 80° nominal coverage |
|
| 55 – 20000 Hz response |
|
| 99 dB sensitivity |
|
| XO-3 dedicated crossover network |
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications | Nominal diameter (mm/in) | 305/12 | | Power Rating (AES, W rms) | 250 | | Nominal impedance (Ω) | 8 | | Voice coil diameter (mm/in) | 63.5/2.5 | | Magnet type | Ceramic | | Magnet weight (kg/oz) | 1.2/42 | | Chassis type | Pressed steel | | Sensitivity (dB) | 97 | | Frequency range (Hz) | 40-4000 | | Coil material | Round copper | | Former material | Polyimide | | Cone material | Kevlar loaded paper | | Surround material | Cloth-sealed | | Suspension | Single | | Xmax (mm/in) | 2.4/0.09 | | Gap depth (mm/in) | 8.0/0.31 | | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters | D (m/in) | 0.26/10.24 | | Fs (Hz) | 63 | | Mmd (g/oz) | 39.60/1.40 | | Mair | | | Qms | 6.70 | | Qes | 0.54 | | Qts | 0.50 | | Re (Ω) | 5.13 | | Vas (lt/ft3) | 54.5/1.92 | | BI (Tm) | 13.20 | | Cms (mm/N) | 0.14 | | Rms (kg/s) | 2.76 | | Le (mH) | | Mounting Information | Overall diameter (mm/in) | 309/12.17 | | Overall depth (mm/in) | 130/5.12 | | Cut-out diameter (mm/in) | 283/11.14 | | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | | Number of mounting slots | 4 | | Mounting slot PCD range (mm/in) | 297/11.69 | | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight | Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | | Single pack weight (kg/lb) | 3/6.6 | | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | | Multipack (60) weight (kg/lb) | 190/419 |
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 65W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 97dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Rounded copper | | Magnet type | Ceramic | | Magnet weight | 35oz, 0.99kg | | Frequency range | 80-5000Hz | | Resonance frequency, Fs | 85Hz | | DC resistance, Re | 6.9Ω & 11.8Ω | | Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 5.0“, 128mm | | Magnet structure diameter | 5.7“, 145mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 12.1lb, 5.5kg |
|
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
| BETA- 12A Series Standard American
Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also
works well for PA in a sealed or bandpass enclosure.
SPECIFICATION
- Nominal Basket Diameter 12", 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 250 W / Music Program 500 W
- Resonance 47 Hz
- Usable Frequency Range 43 Hz - 3.8 kHz
- Sensitivity 98
- Magnet Weight 38 oz.
- Gap Height 0.312", 7.92 mm
- Voice Coil Diameter 2", 50.8 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.0
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 6.00
- Electromagnetic Q (Qes) 0.50
- Total Q (Qts) 0.46
- Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 237 cc
- Mechanical Compliance of Suspension (Cms) 0.29 mm/N
- BL Product (BL) 10.8 T-M
- Diaphragm Mass inc. Airload (Mms) 40 grams
- Efficiency Bandwidth Product (EBP) 94
- Maximum Linear Excursion (Xmax) 4.4 mm
- Surface Area of Cone (Sd) 538.9 cm²
- Maximum Mechanical Limit (Xlim) 11 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft.
Vented 36.8-139 liters/1.3-4.9 cu.ft.
- Overall Diameter 12.03", 305.5 mm
- Baffle Hole Diameter 10.95", 278.1 mm
- Front Sealing Gasket standard fitted as standard
- Rear Sealing Gasket standard fitted as standard
- Mounting Holes Diameter 0.25", 6.4 mm
- Mounting Holes B.C.D. 11.59", 294.3 mm
- Depth 4.57", 116 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
- Neodymium Coaxial Transducer
- 98 dB Sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich Voice Coil
- Triple Aluminum demodulating Rings
- Elliptical 80° x 60° Waveguide for precise directivity
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quaity Sound
- Optimal for compact 2-way Systems
|
Reviews
There are no reviews yet.