B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k

99.20 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1″ high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 […]

 

Read more

DE-16 Driver 60WRMS, 106dB, 2.5-20k

1″ high frequency compression driver. Low mass mylar
diaphragm ensures a very flat frequency response and
optimized ceramic magnet assembly allows for high
sensitivity and low distortion up to 18 kHz.

Specifications1
Throat Diameter 25 mm (1 in)
Nominal Impedance 8 Ω
Minimum Impedance 7.8 Ω
Power Handling
(2200 –20000 Hz)
Nominal2 30 W
Continuous Program3 60 W
Sensitivity (1W/1m)4 107 dB
Frequency Range 1.5 – 18 kHz
Recommended Crossover5 2.2 kHz
Voice Coil Diameter 44 mm (1.7 in)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Mylar
Flux Density 1.5 T

Mounting and Shipping Information
Two M6 holes 180° on 76 mm (3 in) diameter
Overall Diameter 102 mm (4 in)
Depth 58 mm (2.3 in)
Net Weight (1 unit) 1.6 kg (3.5 lb)
Shipping Weight (8 units) 13.9 kg (30.6 lb)
Shipping Box (8 units) 220x220x150 mm
(8.7×8.7×5.9 in)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Weight 1.70 kg

Reviews

There are no reviews yet.

Be the first to review “B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k”

Your email address will not be published. Required fields are marked *

Quick Comparison

B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeJBL 2451H NEODYMIUM DRIVER 4' 150W 8Ω removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-35 Tweeter με μαγνήτη νεοδυμίου 50W program 107dB/W/m-3500-18000 Hz. removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm removeB & C Speakers DE-12 Driver 106,5dB 16ohm remove
NameB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeJBL 2451H NEODYMIUM DRIVER 4' 150W 8Ω removeJBL 2426 COMPRESSION DRIVER 1,5" 70W 16Ω removeB & C Speakers DE-35 Tweeter με μαγνήτη νεοδυμίου 50W program 107dB/W/m-3500-18000 Hz. removeB & C Speakers DE-1050 Driver 2", 140W, 109dB, 0.5-20kHz Titanium diaphragm removeB & C Speakers DE-12 Driver 106,5dB 16ohm remove
ImageB & C Speakers DE-12 Driver 40WRMS, 106,5dB 16ohm
SKUDE-162451H2426JDE-35DE-1050DE-12 16
Rating
Price 99.20 incl. GR VAT 1,644.00 incl. GR VAT 479.00 incl. GR VAT 54.00 incl. GR VAT 524.22 incl. GR VAT 74.76 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • 50 W continuous program power capacity
  • 1" horn throat diameter
  • 36 mm (1.4 in) aluminium voice coil
  • Polyester diaphragm
  • 1500 - 18000 Hz response
  • 106 dB sensitivity
ContentDE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet structure, 8Ω

70W AES compression driver, 1.75 διάφραγμα τιτανίου, 16Ω

The model 2426H is a professionalquality high frequency compressiondriver which incorporates JBL'stitanium diamond diaphragm. Thistitanium diamond structure combinesthe ruggedness of phenolic andcomposite-type diaphragms with theoutstanding frequency response offragile aluminum and exotic metaldiaphragms.

JBL's exclusive suspension, consistingof a three-dimensional diamondpattern, reduces bendingstresses in the diaphragm supportstructure. The depth of the diamondpattern is closely controlled toprovide predictable frequencies forthe 2nd and 3rd normal resonancemodes and for the basic suspensionresonance.

The mathematically determinedphasing plug consists of concentricexponential horns to minimize phasecancellations. Phasing plug, throat exittube and diaphragm assemblies areidentical to the previous model.

All cast parts and tolerances are held to the same levels traditionally associated with JBL designs. Additionally the press-fit assembly and interlocking parts assure greater resistance to the mechanical shock. Diaphragm assemblies are rim centered rather than pin mounted, for instant interchange ability and ease of field service.Mounting is provided for standard25 mm (1 in) three bolt pattern. The front snout may be removed(unscrewed) to allow standard 1 3/8" -18 screw mounting. Through holes for external attachment points are also provided. A machined ring of copper surrounds the pole piece to counteract the inductance of the voice coi1 at high frequencies. After manufacture, the frequency response of each driver is tested for conformity to rigid performance standards.

The 2426H is offered in an 8 ohm impedance, and the otherwise identical 2426J is offered in a 16 ohm impedance.

 

The 2426H features a removable flange to expose a 1 3/8“-18 snout for screw-on type horns.

Specifications:

  • Throat Diameter: 25 mm (1 in)

  • Nominal Impedance:2426H - 8 ohms2426J - 16 ohms

  • Minimum Impedance: 5 ohms (H), 9 ohms (J) @ 5 kHz

  • D.C. Resistance: 3.3 ohms (H), 6.5 ohms (J) +/- 10% @ 25C

  • Power Capacity:70 W continuous program above 800 Hz100 W continuous Program above 1.2 kHz

  • Sensitivity:107 dB SPL, 1 W @ 1 m, JBL 2344A horn110 dB SPL, 1 W @ 1 m, JBL 2370A horn117 dB SPL, 1 mW on plane wave tubes

  • Nominal Efficiency: 25% (800 Hz to 2.5 kHz)

  • Frequency Range: 500 Hz to 20 kHz

  • Recommended Crossover4: 800 Hz or higher, 12 dB/octave slope minimun

  • Diaphragm: 0.05 mm (0.002 in) pure titanium

  • Voice Coil Diameter: 44 mm (1% in)

  • Voice Coil Material: Edgewound aluminum ribbon

  • Flux Density: 1.8 T (18,000 gauss)

  • Bl Factor:6.3 N/A(H)9.3 N/A (J)

  • Positive voltage to black terminal gives diaphragm motion toward phasing plug

  • Mounting:Three 1/4-20 threaded holes, 120 apart on 57.2 mm

  • (2-1/4 in) diameterFront snout may be removed (unscrewed) to expose standard 1 3/8 in -18 screw threads
  • Dimensions: 149 mm (5 7/8 in) diameter, 104 mm (4 1/8 in) depth

  • Net Weight: 4.3 kg (9-1/2 lb)
50 W continuous program power capacity
32 mm (1.25 in) aluminium voice coil
Mylar diaphragm
3500 – 18000 Hz response
108 dB sensitivity
Compact Neodymium magnet assembly
280 W continuous program power capacity
2” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE12
Product code DRV01216

Informations

Nominal impedance 16 ohm
Dimensional category 3.5 inch
Manufacturer sensitivity 106 dB
Nominal power handling 20 W
Bandwidth 1500÷18000 Hz
Recommended min cutoff frequency 2200 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.19 mH

Datas

Flux density 1.45 T
Zmin 10.9 ohm
Weight ~1 kg

Dimensions

Voice coil diameter 1.4 inch
Outside diameter 90 mm
Depth 49 mm
Driver dimensions mouting holes 5.0 mm
Driver mounting system 2 points on diameter 76 mm

Shape & Materials

Front chape Cylindrical
Magnet type Ferrite
Winding material Aluminium
Diaphragm material Polyester
Weight1.70 kg6.00 kg4.50 kg10.00 kg3.40 kg1.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.70 kg
Weight 6.00 kg
Weight 4.50 kg
Weight 10.00 kg
Weight 3.40 kg
Weight 1.5 kg