Content |
44 mm (1.7 in) aluminium voice coil |
| 150 – 6000 Hz response |
| 96.5 dB sensitivity |
| Neodymium magnet allows a very light yet powerful motor assembly |
| Aluminium demodulating ring allows a very low distortion figure |
| 300 W continuous program power capacity |
| Ventilated voice coil gap for reduced power compression |
|
Nominal Specifications
* Nominal Diameter 6“, 160 mm
* Overall Diameter 7.34/6.37“, 186.5/162 mm
* Bolt Circle Diameter 6.77“, 172 mm
* Baffle Cutout Diameter 5.78“, 147 mm
* Depth 3.43“, 87.2 mm
* Flange and Gasket Thickness 0.29“, 7.5 mm
Electrical Specifications
* Minimum Impedance 6.6 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 120 W
* Maximum Power Handling**** 240 W
* Sensitivity (1W/1m) 95 dB
* Frequency Range 100 - 10,000 Hz
* Voice Coil Diameter 1.5“, 37 mm
* Winding Material Aluminium
* Former Material Kapton
* Winding Depth 0.47“, 12 mm
* Magnetic Gap Depth 0.24“, 6 mm
* Flux Density 1.4 T
THIELE & Small Parameters
* Resonant Frequency (fs) 100 Hz
* DC Resistance (Re) 5.8 Ohm
* Coil Inductance (Le) 0.35 mH
* Mechanical Q (Qms) 6.36
* Electromagnetic Q (Qes) 0.36
* Total Q (Qts) 0.34
* Compliance Equivalent Volume (Vas) 0.18 ft³, 5.04 dm³
* Mechanical Compliance of Suspension (Cms) 0.27 mm/N
* Rms 1.03 Kg/s
* BL Product (BL) 10.3 N/A
* Diaphragm Mass inc. Airload (Mms) 11.7 grams
* Maximum Linear Excursion (Xmax)* 5 mm
* Xdamage** 11.6 mm
* Surface Area of Cone (Sd) 17.67“², 114 cm²
* Diaphragm mass (Mmd) 11 g
* Eta Zero 0.93 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
- 130 W + 25 W Power handling
- 1.5" + 1" voice coil
- Single point source providing coherent wave front
- 900 conical dispersion
- Optimal for compact 2-way systems
|
240 W continuous program power capacity |
|
38 mm (1.5 in) aluminium voice coil |
|
150 – 6000 Hz response |
|
96 dB sensitivity |
| B&C 6PEV13 6-1/2" Midrange Speaker
B&C's 6PEV13 6-1/2" midrange speaker features great sensitivity and very smooth response from 400 Hz to 8 kHz. An aluminum phase plug increases the 6PEV13's axial sensitivity and controls its high frequency dispersion. Aluminum voice coil on fiberglass former.
Product Specifications
- Nominal Diameter6-1/2“
- Power Handling (RMS)120 Watts
- Power Handling (max)240 Watts
- Impedance8 ohms
- Frequency Response150 to 8,000 Hz
- Sensitivity99 dB 1W/1m
- Voice Coil Diameter1.5“
Thiele-Small Parameters
- Resonant Frequency (Fs)126 Hz
- DC Resistance (Re)5.2 ohms
- Voice Coil Inductance (Le)0.6 mH
- Mechanical Q (Qms)4.6
- Electromagnetic Q (Qes)0.39
- Total Q (Qts)0.36
- Compliance Equivalent Volume (Vas)0.21 ft.³
- BL Product (BL)8.2 Tm
- Diaphragm Mass Inc. Airload (Mms)6g
- Maximum Linear Excursion (Xmax)0.6 mm
- Surface Area of Cone (Sd)132 cm²
Materials of Construction
- Cone MaterialPaper
- Surround MaterialFoam
- Voice Coil Wire MaterialAluminum
- Voice Coil FormerFiberglass
- Basket / Frame MaterialCast Aluminum
- Magnet MaterialNeodymium
Mounting Information
- Overall Outside Diameter7.4“
- Baffle Cutout Diameter5.7“
- Depth3.1“
- Bolt Circle Diameter6.7“
- # Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
- Sealed Volume0.04 ft.³
- Sealed F3299 Hz
- Vented Volume0.11 ft.³
- Vented F3174 Hz
|
Nominal Diameter 160 mm (6 in)
Overall Diameter 181.2/164 mm (7.13/6.46 in)
Bolt Circle Diameter 167 mm (6.57 in)
Baffle Cutout Diameter 147 mm (5.79 in)
Depth 84.5 mm (3.33 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 1.2 Kg (2.64 lb)
Shipping Box
(Single Carton Box - 4 units) 380x393x128 mm (14.9x15.47x5.03 in)
Shipping Weight (4 units) 5.6 Kg (13.82 lb)
Nominal Impedance 8 Ohm
Minimum Impedance 5.9 Ohm
Nominal Power Handling *** 100 W
Maximum Power Handling **** 200 W
Sensitivity (1W/1m) 91 dB
Frequency Range 63÷5000 Hz
Voice Coil Diameter 32 mm (1.26 in)
Winding Material Cu
Former Material Kapton
Winding Depth 12.5 mm (0.49 in)
Magnetic Gap Depth 6 mm (0.24 in)
Flux Density 1 T
Fs 61 Hz
Re 5.4 Ohm
Qes 0.6
Qms 6
Qts 0.54
Vas 14.8 dm^3 (0.52 ft^3)
Sd 137 cm^2 (21.23 in^2)
Xmax * 5.25 mm
Xdamage ** 13.15 mm
Mms 14 g
Bl 6.8 N/A
Le 0.5 mH
Mmd 13 g
Cms 0.56 mm/N
Rms 0.84 Kg/s
Eta Zero 0.46 %
EBP 102 Hz
|
Reviews
There are no reviews yet.