| Content |
| 1200 W continuous program power capacity |
|
| 76 mm (3 in) copper voice coil |
|
| 40 – 2000 Hz response |
|
| 100.5 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Neodymium ring magnet allows a very high force factor and linear excursion |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
| |
KAPPA PRO-15A Professional Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 500 W / Music Program 1000 W
- Resonance 47 Hz
- Usable Frequency Range 46 Hz - 4 kHz
- Sensitivity 101
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.23
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 8.01
- Electromagnetic Q (Qes) 0.40
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
- Peak Diaphragm Displacement Volume 274 cc
- Mechanical Compliance of Suspension (Cms) 0.16 mm/N
- BL Product (BL) 16.6 T-M
- Diaphragm Mass inc. Airload (Mms) 72 grams
- Efficiency Bandwidth Product (EBP) 118
- Maximum Linear Excursion (Xmax) 3.2 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 54-184 liters/1.9-6.5 cu.ft.
- Overall Diameter 15.32“, 389.1 mm
- Baffle Hole Diameter 14.0“, 355.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.1 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.06“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Die-cast aluminum basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
| Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a ventedsatellite enclosure.
Product type
Loudspeaker Chassis
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Depth of the magnetic gap
6.35 mm
Fs (Resonance Frequency)
41 Hz
Re (DC resistance)
5.88 Ohm(s)
Qms (mechanical quality)
7.23
Le (inductance of the voice coil)
0.84 mH
Qes (electrical quality)
1.53
Qts (overall quality)
1.26
Vas (equivalent volume)
260
BL (power factor)
7.7 T/m
Xmax (maximum displacement)
3.8 mm
Cms (elasticity of the suspension)
0.25 mm/N
Sd (membrane area)
856.3 cm²
| KAPPA-15A American Standard Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 450 W / Music Program 900 W
- Resonance 33 Hz
- Usable Frequency Range 52 Hz - 2.3 kHz
- Sensitivity 100.5
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 33 Hz
- DC Resistance (Re) 5.22
- Coil Inductance (Le) 1.05 mH
- Mechanical Q (Qms) 8.90
- Electromagnetic Q (Qes) 0.33
- Total Q (Qts) 0.32
- Compliance Equivalent Volume (Vas) 321.3 liters / 11.35 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 343 cc
- Mechanical Compliance of Suspension (Cms) 0.31 mm/N
- BL Product (BL) 15.7 T-M
- Diaphragm Mass inc. Airload (Mms) 76 grams
- Efficiency Bandwidth Product (EBP) 98
- Maximum Linear Excursion (Xmax) 4.0 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 11.6 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 45-113 liters/1.6-4 cu.ft.
- Overall Diameter 15.16“, 384.9 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.13“, 156 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
| DELTA-15A Series Standard American
Recommended for professional audio as a mid-bass or vocal wedge in a sealed enclosure. Also suitable as a
mid-bass or woofer in vented enclosures.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 40 Hz
- Usable Frequency Range 48 Hz - 4 kHz
- Sensitivity 100
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 40 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 8.05
- Electromagnetic Q (Qes) 0.57
- Total Q (Qts) 0.53
- Compliance Equivalent Volume (Vas) 270.7 liters / 9.56 cu.ft
- Peak Diaphragm Displacement Volume (Vd) 233 cc
- Mechanical Compliance of Suspension (Cms) 0.26 mm/N
- BL Product (BL) 13.2 T-M
- Diaphragm Mass inc. Airload (Mms) 62 grams
- Efficiency Bandwidth Product (EBP) 70
- Maximum Linear Excursion (Xmax) 2.7 mm
- Surface Area of Cone (Sd) 864.6 cm²
- Maximum Mechanical Limit (Xlim) 11.1 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 37-42.5 liters/1.3-1.5 cu.ft.
Vented 82-161.4 liters/2.9-5.7cu.ft.
- Overall Diameter 15.15“, 384.8 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.05“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
Reviews
There are no reviews yet.