Content | LF B&C Speakers 15-PS76 Subwoofer Speaker 15 inch 1100W, 99dB
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
15PS76 |
Product code |
ALT15PS768 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
15.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
99 dB |
Calculated sensitivity |
96.92 dB |
Nominal power handling |
550 W |
Bandwidth |
40÷2000 Hz |
Fundamental parameters
|
Sd |
855 cm² |
Mms |
106 gr |
Le |
1.3 mH |
Re |
5 ohm |
BL |
22.1 T.m |
Small signal parameters
|
Fs |
38 Hz |
Qes |
0.28 |
Qms |
5.2 |
Qts |
0.26 |
Vas |
164 L |
Datas
|
Xmax |
±7.5 mm |
Calculated Xmax |
±7.6667 mm |
EBP |
136 Hz |
Zmin |
6.3 ohm |
Fs / Qts |
146 Hz |
Vas * Qts² |
11.09 L |
Efficiency |
3.3 % |
Calculated efficiency |
3.09 % |
Weight |
~8.7 kg |
Dimensions
|
Voice coil diameter |
3 inch |
Winding depth |
19 mm |
Gap height |
11 mm |
Outside diameter |
393 mm |
Baffle cutout diameter |
354 mm |
Front thickness |
16 mm |
Depth after front |
155 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Ferrite |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
Surround material |
Cloth |
EAN 8059300642818 |
1400 W continuous program power capacity |
| 100 mm (4 in) copper voice coil |
| 40 – 2000 Hz response |
| 97 dB sensitivity |
| Double silicone spider with optimized compliance |
|
800 W continuous program power capacity |
|
76 mm (3 in) copper voice coil |
|
40 – 2000 Hz response |
|
100 dB sensitivity |
| Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg |
1000 W continuous program power capacity |
|
76 mm (3 in) copper voice coil |
|
40 – 2000 Hz response |
|
99.5 dB sensitivity |
|
Neodymium magnet allows a very light yet powerful motor assembly |
|
Ventilated voice coil gap for reduced power compression |
|
The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“. |
Reviews
There are no reviews yet.