AKG MK PS Connecting cable from PS to SR 0,6m

15%
AKG
All products by AKG

€15.81 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MK PS Category:
Connecting cable from PS to SR. The cable for connecting antenna power splitters with receivers shall be an RG 58 cable (50 Ohms), length 0.6 m, gold plated BNC connectors on both ends.

 

Read more

Connecting cable from PS to SR. The cable for connecting antenna power splitters with receivers shall be an RG 58 cable (50 Ohms), length 0.6 m, gold plated BNC connectors on both ends.

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “AKG MK PS Connecting cable from PS to SR 0,6m”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG MK PS Connecting cable from PS to SR 0,6m removeAKG SRA 2W Passive wideband directional antenna removeSHURE PS40E-In-Line Power Supply -220 V- removeSENNHEISER ASA-3000 Active Antenna Spliter removeTOA IR-300M Infrared Wireless Microphone removeAKG SRA 2B l Paddle Antenna remove
NameAKG MK PS Connecting cable from PS to SR 0,6m removeAKG SRA 2W Passive wideband directional antenna removeSHURE PS40E-In-Line Power Supply -220 V- removeSENNHEISER ASA-3000 Active Antenna Spliter removeTOA IR-300M Infrared Wireless Microphone removeAKG SRA 2B l Paddle Antenna remove
Image
SKUMK PSSRA 2WPS40EH12SE00157IR-300MSR A2B
Rating
Price €15.81 incl. GR VAT €495.00 incl. GR VAT €37.50 incl. GR VAT €2,150.00 incl. GR VAT €290.00 incl. GR VAT €405.00 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Connecting cable from PS to SR. The cable for connecting antenna power splitters with receivers shall be an RG 58 cable (50 Ohms), length 0.6 m, gold plated BNC connectors on both ends.

  • For indoor and outdoor use, preferred-direction coverage
  • Water-resistant, rugged case with BNC input

 Model Description:
In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter

Model Details:
The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.

Specifications:

  • Power : 220 VAC

Technical Data
    RF frequency range        470 ..... 870 MHz
    Transmission loss        0 dB
    Nominal impedance        50 Ohm
    RF input        BNC
    Remarks        Booster Feed: 12 V, 70 mA
    Mains voltage        100 - 240 V
    Mains frequency        50 - 60 Hz
    Dimensions        19 ʼʼ, 1U
    Weight        approx. 3 kg

The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Input Sensitivity Adjustment Adjustment range: -9 dB to 0 dB (factory preset: 0 dB)
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Input External microphone input (φ3.5 monaural mini jack)
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“)
Weight 130 g (0.29 lb) (with battery and strap)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

The AKG SRA2B is an active wideband directional antenna designed for indoor or outdoor use, specifically, for setting up radio links for distances up to 300 m (1000 feet). Integrated high-performance antenna booster for use with antenna cables up to 200 m (655 feet) long (RG 213, in conjunction with 2 x AB 4000).

AKG SRA2B main features include:

  • Remote powering option
  • Water-resistant case, BNC output Status LED
  • Optional laser positioning pointer
  • Carrier frequency range: 650 to 870 MHz
  • Antenna gain: 6 dB
  • Coverage angle: 70°
  • Booster gain: 17 dB
  • Dimensions: 230 x 240 x 26 mm (9.0 x 9.4 x 1.0 in.)
  • Weight: 250 g (8.8 oz.)
Weight0.10 kg0.20 kg0.50 kg3.00 kg0.14 kg0.25 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 3.00 kg
Weight 0.14 kg
Weight 0.25 kg

Related products