| Content | The AKG WMS 45 Sport A 1 Perception Wireless Sports Set is a lightweight, headworn wireless microphone system that allows for maximum user mobility during sports class instruction and all other hands-free applications.
The system includes the SR 45 wireless receiver, PT 45 bodypack transmitter and the C 544 L headworn microphone.
The C 544 L is a headworn miniature condenser microphone with a cardioid polar pattern and convenient behind-the-neck headband. The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm places the mic in front of the corner of your mouth, rather than directly in front of your mouth. This is to minimize pop noise and protect the microphone from contamination. Furthermore, a moisture shield on the microphone capsule is designed to make it difficult for sweat and makeup to penetrate into the microphone.
To help you find an interference-free channel to use, the Perception Wireless Sports Set has 8 UHF frequencies to choose from. Designed for long-lasting continuous use, the compact PT 45 bodypack is powered with a single AA battery for up to 8 hours. The SR 45 receiver provides XLR and 1/4" jack outputs for connection to your mixer and amplification system.
Features:
- 8 hours of operation with a single AA size battery
- PT 45 bodypack transmitter also compatible with all AKG MicroMics
- Low battery indicator
- PT 45 bodypack designed to be compact and lightweight
- C 544 L headworn microphone comes with moisture shields protecting the transducer from perspiration for sports instruction and other active applications. The C 544 L uses the transducer of the C 555 L and is designed to be quick and easy to put on or replace if necessary
Specs:
Receiver:
- Receiver Type: SR45 Receiver
- Carrier Frequency: A / 530 - 560MHz
- Modulation: FM
- Audio Bandwidth: 40 Hz to 20 kHz
- THD & Noise: typ. 0.8%
- Signal-to-Noise Ratio: typ. 105 dB(A)
- Squelch: -100 to -70 dBm Adjustable
- Connections: Balanced XLR and unbalanced 1/4" (6.3 mm) jack: adjustable from mic to line level. Output level at rated deviation: 500 mV rms
- Dimensions: 7.87 x 7.48 x 1.73" (200 x 190 x 44 mm)
- Weight : 0.80 lb (360 g)
Transmitter:
- Transmitter Type: PT45 Bodypack
- Carrier Frequency: A / 530 - 560MHz
- Modulation: FM
- Audio Bandwidth: 40 Hz to 20 kHz
- THD & Noise: typ. 0.8%
- Signal-to-Noise Ratio: typ. 105 dB(A)
- RF Output: 10 mW
- Power: 1x 1.5V AA Battery, Up to 10 Hours
- Dimensions: 2.36 x 2.91 x 1.18" (60 x 74 x 30 mm)
- Weight: 0.13 lb (60 g)
Microphone:
- Microphone Type: C 544 L Headworn Microphone
- Transducer: Pre-polarized condenser microphone
- Polar Pattern: Cardioid
- Frequency Response: 20 Hz to 20 kHz
- Sensitivity: 40 mV/Pa (-28 dBV re 1 V/Pa) @ 1000 Hz
- Signal to Noise Ratio: 22 dB(A)
- Maximum Input Sound Level: 126 dB / 130 dB (for 1%/3% THD)
- Supply Voltage: 9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter
- Current Consumption: Approx. 2 mA
- Impedance: Electrical Impedance @ 1000 Hz: 200 ohms, electronically balanced
- Recommended Load Impedance: > 2000 ohms
- Connector: Mini XLR 3-pin female
- Operating Temperature: 4 to 140°F (-20 to +60°C), R.H. at 68°F (+20°C): 99%
- Dimensions: 5.2" (130 mm) Diameter
- Cable Length: 5\' (1.5 m)
- Net Weight: 1.1 oz (30 g) without connector
The Perception Wireless high performance Sports Set delivers brilliant sound and is surprisingly easy to use. | Shure WH20TQG Dynamic Headset Microphone Shure Performance MicrophonesDynamic Headset Microphone
The improved version of the WH10, the Shure Model WH20TQG is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20 is suitable for any voice communications application where comfort and reliability are required.
The WH20 TQG has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
An integrated elastic CROAKIES ? headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. The WH20 TQG is supplied with a foam windscreen and clothing clip.
Features:
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- The WH20TQG has a miniature four-pin female Tini "QG" connector for direct connection to Shure wireless body pack transmitters - This microphone to be used ONLY with an existing Shure body-pack transmitter.
Transducer
|
Dynamic, close-talking |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 Hz to 15 kHz, Measured @ 0.3" (8.0 mm) |
| Power Requirements |
Dynamic (Requires NO Phantom Power) |
| Impedance |
150 ohms (200 ohms actual) |
| Output Level |
Open Circuit Voltage: -67 dB/Pa (1.48' / 0.45 m)
1 Pa = 94 dB SPL
Close-talked (@ 0.50" / 12.5 mm) @ 1,000 Hz |
| Electromagnetic Hum Sensitivity |
38.4 dB equivalent SPL in a 1 mOe field |
| Operating Temperature |
0 to 140°F (-18 to 60°C) |
| Storage Temperature |
-20 to 165°F (-29 to 74°C) |
| Connector |
TA4F connector for Shure bodypack transmitters |
| Cable Length |
4.0' (1.2 m) |
| Dimensions |
Not specified by manufacturer |
| Weight |
2.2 oz (63 g) including connector |
| Packaging Info |
| Package Weight |
0.7 lb |
| Box Dimensions (LxWxH) |
7.6 x 6.4 x 3.1" |
|
Shure WBH54T Tan Headworn Condenser Microphone
WBH54B is a subminiature, electret condenser head worn microphone. It provides uncompromised
sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring.
Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech
and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for
stability and comfort. A plastic carrying case protects the microphone and its accessories.
Features:
Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement
Available with an in-line preamp or with a TA4F connector for wireless applications
Black finish
TA4F connector for wireless applications
|
Shure WBH53T Tan Headworn Condenser Microphone
Features of the Shure WBH53 Headworn Microphone:
? Comfortable, latex-free Dynaflex? earforms that hide behind the ears
? Thin, non-reflective wireframe that is easily hidden underneath hair
? Ultra-thin detachable microphone boom mount for right or left positioning
? Interchangeable frequency response caps (mild or high, two pieces each)
? Two foam windscreens included
? Clothing clip for securing cable
? Corrosion resistant
? Easy to clean
? Durable carrying case for protective storage
? Available in either black or tan
? Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility
|
Headset vocal condenser microphone for wired or wireless applications.
The Audix HT2P is a professional head-worn microphone designed for use in performances, aerobics instruction, presentations and more. The HT2P features a frequency response of 50Hz to 15kHz, reproducing audio frequencies associated with vocals with pristine fidelity while eliminating noise at low frequency ranges. The HT2P features a hyper-cardioid polar pattern. The hyper-cardioid pattern provides excellent off-axis signal rejection, minimizing noise due to audio monitors, ambiance, other musicians and more. The headset itself is lightweight and padded for extra comfort, the capsule is completely resistant to moisture
|
Features:
* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use
Specifications:
* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)
|
Reviews
There are no reviews yet.