Content |
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability. Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
1200 Watt Peak, 600 Watt RMS 131 dB max SPL 45 Hz - 20 kHz frequency response 15" Woofer, 2.5" voice coil 1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz Max SPL: 131 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression Driver: 1“, 1.4" voice coil Woofer: 15“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal Input connectors: Jack-XLR male Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz Protections: RMS limiter, HF Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK High frequencies: 400 W PEAK Low frequencies: 800 W PEAK Total power: 600 W RMS High frequencies: 200 W RMS Low frequencies: 400 W RMS
Cabinet Specs
Cabinet Material: Baltic birch Handles: 1 side Pole Mount/Cap: Yes Colour: Black
Size/Weight
Height: 362/14.25 mm/inch Width: 673/26.49 mm/inch Depth: 473/18.62 mm/inch Net Weight: 20.7/45.63 kg/lbs | LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.
The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.
Cabin Type: | Wooden, 3-way | Monitor Use: | Yes | Amplifier: | 1,400‐watt | LF/MF, Woofer: | 2x10” | HF, Horn: | 1” exit compression driver | DSP Processor: | Yes | Frequency Response: | 47 Hz to 18 kHz | Dimensions: | 312 mmx861 mmx 312 mm | Weight: | 26.1 kg | Color: | Black |
|
The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.
Features |
---|
750 Watt Digipro digital amplifier | 130 dB max spl | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | 12" woofer, high power neodymium 3" voice coil | 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 130 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Compression Driver: | 1" neo, 1.75" v.c. | | Woofer: | 12" neo, 3" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | ba l/ unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1700 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, side / floor, contour | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | 6 x fly tracks | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 646 / 25.43 mm/inch | | Width: | 385 / 15.15 mm/inch | | Depth: | 375 / 14.76 mm/inch | | Net Weight: | 21.2 / 46.73 Kg/Lbs |
|
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
|
The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations. Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.
APPLICATIONS
- • Live Sound
- • Rental
- • Portable PA
- • Stage Monitoring
- • Clubs
General Specs
1200 WATT PEAK, 600 WATT RMS Digital Bi-amp DSP Sound Processing RCF Precision Transducers SPL max. 129 dB
Acoustical Specs
Frequency Response -3 dB:50 Hz ÷ 20000 Hz Max SPL:129 dB Horizontal coverage angle:90° Vertical coverage angle:60° Compression Driver:1“, 1.7" voice coil Woofer:10“, 2.5" voice coil
Inputs/Outputs
Input signal:bal/unbal Input connectors:Jack-XLR male Output connectors:XLR female Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:1700 Hz Protections:thermal, RMS Limiter:Fast limiter Controls:Volume, EQ shape, Mic/line
Amplifier Specifications
Total power:1200 W PEAK High frequencies:300 W PEAK Low frequencies:900 W PEAK Total power:600 W RMS High frequencies:150 W RMS Low frequencies:450 W RMS Connections:VDE AC socket
Cabinet Specs
Cabinet Material:Composite PP Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom Handles:1 top, 1 side Pole Mount/Cap:Yes Grille:Steel Colour:Black
Size/Weight
Height:527/20.74 mm/inch Width:303/11.92 mm/inch Depth:302.5/11.90 mm/inch Net Weight:13.9/30.64 kg/lbs |
Reviews
There are no reviews yet.