STAGG CM-5050-H Condenser Microphone

Discontinued

48.50 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Electret condenser microphone for cymbals, hi-hats, overhead recording – Element type: pre-polarized backplate (electret) – Polar pattern: cardioid – Impedance: 200 Ohms (balanced) – Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) – Frequency Response: 50 Hz to 18 Khz – Max SPL: 136 dB (for 1% THD @ 1Kz) – S/N ratio: >60 […]

 

Read more

Electret condenser microphone for cymbals, hi-hats, overhead recording – Element type: pre-polarized backplate (electret) – Polar pattern: cardioid – Impedance: 200 Ohms (balanced) – Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) – Frequency Response: 50 Hz to 18 Khz – Max SPL: 136 dB (for 1% THD @ 1Kz) – S/N ratio: >60 dB (Ref. 1Pa, A-weighted) – Power source (external): nominal 9-52 Vdc (phantom) – Dim.: 22 mm / 0.86 in.(diam.) x 155 mm / 6 in. (length) – Weight: 178 g / 6.2 oz. – ROHS Compliant – Colour: black.

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “STAGG CM-5050-H Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

STAGG CM-5050-H Condenser Microphone removeShure 520DX - Harmonica Microphone 100Hz to 5kHz removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone remove
NameSTAGG CM-5050-H Condenser Microphone removeShure 520DX - Harmonica Microphone 100Hz to 5kHz removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone remove
Image
SKUH10ST00001520DXBETA 56A001809BETA 52AD1301
Rating
Price 48.50 incl. GR VAT 165.12 incl. GR VAT 196.80 incl. GR VAT 98.00 incl. GR VAT 231.36 incl. GR VAT 43.39 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

In stock

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)In stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Electret condenser microphone for cymbals, hi-hats, overhead recording - Element type: pre-polarized backplate (electret) - Polar pattern: cardioid - Impedance: 200 Ohms (balanced) - Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) - Frequency Response: 50 Hz to 18 Khz - Max SPL: 136 dB (for 1% THD @ 1Kz) - S/N ratio: >60 dB (Ref. 1Pa, A-weighted) - Power source (external): nominal 9-52 Vdc (phantom) - Dim.: 22 mm / 0.86 in.(diam.) x 155 mm / 6 in. (length) - Weight: 178 g / 6.2 oz. - ROHS Compliant - Colour: black.

Legendary among harmonica players for its classic blues harp sound, the 520D's tradition is carried on by the 520DX "Green Bullet" and has a contoured size and shape that fits perfectly between harmonica and hands.

  • New volume control knob allows musicians to adjust the volume to fit each musical situation
  • New rugged, dynamic cartridge with improved response
  • High-impedance, omnidirectional
  • Supplied with 1/4 inch connector
  • Frequency response: 100 to 5,000 Hz

 

NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.

Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.

Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

  • Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Compact design reduces stage clutters
  • Hardened steel mesh grille resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz

Audio Frequency Response    50 Hz - 16,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    600 Ω
Mic Type    Instrumental
Open Circuit Voltage    2.2 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Wired/Wireless    Wired
Weight Net    8.32 oz (236 g)

Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps. Technical Info Type: Dynamic, Moving coil. Freq.Resp.: 40 to 16.500 Hz. Polar Pattern: Cardioid Sensitivity (1000Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max SPL: 137dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR male-type). Net. Weight: 245 g Dimensions: (Ø 32 mm x L 157 mm) Accessories: 6 mtr balanced cable with XLR plugs
Weight1.00 kg0.80 kg0.80 kg0.25 kg0.80 kg0.24 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.80 kg
Weight 0.80 kg
Weight 0.25 kg
Weight 0.80 kg
Weight 0.24 kg