STAGG CM-5050-H Condenser Microphone

Discontinued

48.50 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Electret condenser microphone for cymbals, hi-hats, overhead recording – Element type: pre-polarized backplate (electret) – Polar pattern: cardioid – Impedance: 200 Ohms (balanced) – Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) – Frequency Response: 50 Hz to 18 Khz – Max SPL: 136 dB (for 1% THD @ 1Kz) – S/N ratio: >60 […]

 

Read more

Electret condenser microphone for cymbals, hi-hats, overhead recording – Element type: pre-polarized backplate (electret) – Polar pattern: cardioid – Impedance: 200 Ohms (balanced) – Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) – Frequency Response: 50 Hz to 18 Khz – Max SPL: 136 dB (for 1% THD @ 1Kz) – S/N ratio: >60 dB (Ref. 1Pa, A-weighted) – Power source (external): nominal 9-52 Vdc (phantom) – Dim.: 22 mm / 0.86 in.(diam.) x 155 mm / 6 in. (length) – Weight: 178 g / 6.2 oz. – ROHS Compliant – Colour: black.

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “STAGG CM-5050-H Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

STAGG CM-5050-H Condenser Microphone removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeAKG D 40 Dynamic Instrument Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz remove
NameSTAGG CM-5050-H Condenser Microphone removeLD Systems LDWS1000MW Wind / Percussion Instrument Clip Microphone removeELECTRO VOICE PL35 Snare/Tom DYNAMIC CARDIOID MICROPHONE removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeAKG D 40 Dynamic Instrument Microphone removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz remove
Image
SKUH10ST00001LDWS1000MW001809KSM141SLD 40KSM137/SL
Rating
Price 48.50 incl. GR VAT 108.04 incl. GR VAT 98.00 incl. GR VAT 515.99 incl. GR VAT 101.00 incl. GR VAT 396.80 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Electret condenser microphone for cymbals, hi-hats, overhead recording - Element type: pre-polarized backplate (electret) - Polar pattern: cardioid - Impedance: 200 Ohms (balanced) - Sensitivity: 5.6 mV/Pa or -45dB (1V/Pa @ 1 Khz) - Frequency Response: 50 Hz to 18 Khz - Max SPL: 136 dB (for 1% THD @ 1Kz) - S/N ratio: >60 dB (Ref. 1Pa, A-weighted) - Power source (external): nominal 9-52 Vdc (phantom) - Dim.: 22 mm / 0.86 in.(diam.) x 155 mm / 6 in. (length) - Weight: 178 g / 6.2 oz. - ROHS Compliant - Colour: black.

LDWS1000MW User User's manual [7,20 MB]
LDWS1000MW Battery disposal informationLDWS1000MW Frequency listLDWS1000MW Frequency lists / Pin assignment Wireless SystemsLDWS1000MW Data sheet - Microphone for Brass/Wind/Percussioninstruments Wind / percussion instrument clip microphone

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

Specifications:
  • Converter Principle: Electret Condenser Microphone
  • Pick-up Pattern: Cardioid pattern
  • Frequency Response: 50 Hz – 18 kHz
  • SPL: 133 dB
  • Sensitivty: -45 dB +/- 3dB
  • Impedance: 250 Ohms +/- 30% @1kHz
  • Connections: Mini XLR – 3 pins
  • Gooseneck: 70 mm
  • Cable length: 1,5 m
  • Surface: Black matt
  • Weight: 56 g
  • Accessories: Wind protection, Phantom power adapter

Audio Frequency Response    50 Hz - 16,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    600 Ω
Mic Type    Instrumental
Open Circuit Voltage    2.2 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Wired/Wireless    Wired
Weight Net    8.32 oz (236 g)

The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. Features
  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application. Suggested Applications Acoustic Guitar Acoustic Bass Cymbals Brass/Woodwinds Orchestra Ensemble Vocals Piano Strings Room Ambience Live Recording

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A highly consistent cardioid polar pattern
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

Weight1.00 kg0.35 kg0.25 kg0.50 kg0.24 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.35 kg
Weight 0.25 kg
Weight 0.50 kg
Weight 0.24 kg
Weight 0.50 kg