| Content | LED Moving Head with 7 x 10W RGBW 4-in-1 LED's HeadBanger 10 - Output: 6.100 Lux @ 1m - Lens: 25¡ - DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active - User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity) - Control panel: 4-digit LED display + 4 push-buttons, for easy programming - DMX input & output: 3-pin XLR connectors - Metal housing w/ hanging bracket (truss- or other clamp not included) - Low noise Delta Electronics cooling fan - Power consumption: 80W (max) - For indoor use only - Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in - Net weight: 2.75kg/ 6 lbs | SET 4 Pcs WASH: 7 ledx10W RGBW 4-in-1 LEDs + 1Pcs WILDSTAR DMX SCAN CONTROLLER 192Channer
This new compact LED MOVING HEAD 7x10W RGBW, mini moving head uses a powerful 7 LED. It has a 25° beam angle and features and it has power consumption 80W. It can be operated by 9 or 14 Channel DMX or one of the stage friendly internal programs on either auto or sound to light mode. It can be free standing or mounted to trussing using the supplied brackets. It is ideal for uses such as small stages, bars,nightclubs, mobile DJs and bands.
-------- TECHNICAL DATA --------
|
|
| Power consumption |
80W |
| Power supply voltage |
90 - 230V |
| Voltage frequency |
50/60Hz |
| Diode type |
4in1 |
| Number of diodes |
7 |
| Diode power |
10W |
| Display |
LED - 4 characters |
| -------- UTILITY DATA -------- |
|
| Color |
RGBW |
| ZOOM |
No |
| Beam angle (min) |
25° |
| Beam angle (max) |
25° |
| Dimming |
Linear: 0 - 100% |
| Flash frequency (min) |
0Hz |
| Flash frequency (max) |
10Hz |
| FROST filter |
No |
| FOCUS |
No |
| PAN range |
540° |
| TILT range |
270° |
| Number of DMX channels |
9 / 14 |
| DMX standard |
DMX 512 |
| Control interface |
4 buttons |
| Operating modes |
DMX, Master/Slave, Sound controlled |
| -------- INTERFACES -------- |
|
| AC IN |
IEC - C14 |
| DMX IN |
XLR - 3 pin |
| DMX OUT |
XLR - 3 pin |
| ----- PHYSICAL CHARACTERISTICS ----- |
|
| IP Rating |
IP20 |
| Housing made |
ABS |
| Cooling |
Active |
| Weight with packaging [kg] |
3,6 |
RGBW COLOUR MIXING
Beam Angle: 15o ZOOM
Strobe: 1-20fps
Dimmer: DMX controlled Dimmer 0-100%
Movement: 540o PAN - 270o TILT
LED Display for MENU settings
Input signal: DMX 512/12 Channels
Automatic on board programms
Voltage: 115-240V AC
Colour: Black
Dimensions: 180x170x260mm
Weight: 3.8kg |
The Cameo AURO® SPOT 300 is an RDM-capable ultra bright moving head with 16-bit resolution, 630° pan and 235° tilt movement and high speed 3-phase motors. It is powered by a single 180 watt LED and sports 8 intense colors plus white and split colors. A rotating 3-facet prism, 8 fixed and 6 replaceable rotating gobos provide a wide variety of awesome animated effects.
The AURO® SPOT 300 features 5-channel, 15-channel, 24-channel DMX control modes, automated programs and sound activation as well as master, slave and standalone capabilities. Functions include a choice of 4 smooth dimming curves, gobo shake and a high-speed 0 - 20 Hz cycle strobe.
The heavy-duty housing integrates a temperature controlled low noise fan, 3-pin and 5-pin DMX plus Neutrik powerCON inputs and outputs. A battery-powered 6-button display enables convenient offline configuration. The all-professional multi-voltage AURO® SPOT 300 operates on 100 - 240 V AC.
- RDM enabled moving head
- Luminous flux 4900 lm
- High speed 3-phase motors
- 16-bit resolution
- Motor focus
- Automated positioning correction
- Battery powered display for offline configuration
- 8 intense colors, white and split colors
- 2 gobo wheels + open
- 6 rotating and 8 fixed gobos
- Rotating gobos replaceable with metal or glas gobos
- Rotating 3-facet prism
- Smooth dimming from 100 - 0% with 4 selectable curves
- 0 - 20 Hz strobe
Product type
LED Moving Lights
Colour spectrum
8-channel multi colour , Split colours , white
Colour temperature
9300 K
DMX input
XLR 3-pin male , XLR 5-pin male
DMX output
XLR 3-pin female , XLR 5-pin female
DMX mode
15-channel , 24-channel , 5-channel
DMX Functions
auto programs , Dimmer , Dimmer Curve , Gobo Shake , Gobo Wheel , PAN , TILT
High Speed Strobe
1 - 20 Hz
Standalone modes
Auto run , Show , sound control
Controls
Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
Neutrik PowerCon
Housing material
metal , plastic
Cooling
temperature-controlled fan
Illuminance
10250lx @ 5m , 28500lx @ 3m
|
Voltage: 100-240V 50-60HZ,Power consumption: 70W Light source: 4χ10W RGBW /per side, Control Mode: Auto, Sound-active, DMX, M/Slave, Channel: 15/21CH, Angle: Horizontal 540°, Vertical: Infinite rotating, Beam Angle: 2x25 deg. |
Info
Features: > Equipped with 18 x 3 W tricolor LED with RGB colors > Through the close chip placement of the multichip technology, an exquisite color mix even with short distances to the illuminated surface is provided > Compact lightweight > Positioning within 540° PAN and 270° TILT > Stepless RGB color changing > 6 color macros can be called up via DMX controller > Dimmer > Strobe effect with adjustable speed > Random strobe effect > Exact positioning via 16 bit PAN/TILT movement resolution > DMX-controlled operation or stand-alone operation with Master/Slave function > Sound-controlled via built-in microphone > Control board with 4-digit LED display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT Reverse, Reset > DMX control via every standard DMX controller
|
User\'s manual
DMX Control Table
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2
Cameo AURO BAR 100
LED Moving Bar
- LED Moving Bar with infinite pan and tilt
- Two high-speed 3-phase motors
- 16-bit resolution and 3,600 Hz refresh rate
- 7 powerful 15 watt quad LEDs
- Rich RGBW colors, subtle pastel shades, 3 natural whites
- 4 DMX modes, RDM capability and ArtNET compatible
- Ethernet switch with FDT bridging (failsafe data transfer)
- Automatic positioning and color temperature correction
- Single pixel control
- 20 Hz strobe and 4 dimming curves
- 3- and 5-pin DMX, Neutrik powerCON and RJ45 connectors
- Battery powered 6-button display for offline setting
Designed for exciting, highly creative lighting, the Cameo AURO® BAR 100 produces subtle to rich, saturated RGBW color mixes and three temperatures of white with a line of seven 15 watt quad LEDs. The all-professional moving light\'s features include two high speed 3-phase motors for infinite pan and tilt, 16-bit resolution for ultra smooth motion and dimming, and with a 3,600 Hz refresh rate it is ideal for TV and video applications.
In addition, the AURO® BAR 100 sports colour temperature and automatic positioning correction, a strobe function and single pixel control for amazing chase effects. It is RDM enabled and provides four modes of DMX control. The fixture is Art-Net compatible with automatic FDT bridging to maintain daisy chain operation in case of single device failure. A battery powered 6-button display enables easy offline configuration.
Built for reliable heavy-duty use, the AURO® BAR 100 comes in a rugged compound enclosure with both 3-pin and 5-pin DMX, RJ45 and Neutrik powerCON mains inputs and outputs. The versatile fixture operates on all voltages from 100 - 240 V AC.
Product type
LED Moving Lights
Type
LED Moving Heads
Colour spectrum
RGBW
Number of LEDs
7
LED type
15 W
Refresh rate
3600 Hz
Dispersion
4 °
DMX input
RJ45 Ethernet In (ArtNET) , XLR 3-pin male , XLR 5-pin male
DMX output
RJ45 Ethernet Out (ArtNET) , XLR 3-pin female , XLR 5-pin female
DMX mode
19-channel , 29-channel , 39-channel , 9-channel
DMX Functions
auto programs , colour macro , Colour temperature correction , Dimmer , Dimmer Curve , Pan/Tilt , Pan/Tilt fine , Patterns , RGBW , strobe
PAN movement
unlimited
TILT movement
unlimited
High Speed Strobe
0 - 20 Hz
Standalone modes
Auto run
Controls
- , + , Battery Display , Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
140 W
Power connector
Neutrik PowerCon
Housing material
ABS plastic , metal
Cabinet colour
Black
Cooling
Convection
Illuminance
42000lx @ 1m
Luminous flux
2300 lm
Width
570 mm
Height
260 mm
Depth
195 mm
Weight
9,5 kg
|
Reviews
There are no reviews yet.