Content |
Professional multipurpose cardioid dynamic microphone with 5m long XLR-XLR cable in a plastic box
Uses: Instrumental
Cartridge: DC18, moving coil
Polar pattern: Cardioid
Sensitivity: - 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 50 Hz to 15 KHz
Output impedance: 600 ohms 30 % (at 1 KHz)
Connector: Balanced XLR output
Body: Zinc alloy
Cable: 5 m (16'), XLR to XLR
Protection box: Plastic
Colour: Black
|
The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels.
Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch
Technical Data
Pick-up pattern Cardioid
Frequency response (microphone) 40.....18000 Hz
Sensitivity in free field, no load (1kHz)
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 47 x 181 mm
Weight 330 g
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter | The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
Frequency Range |
50 Hz to 15 kHz |
Impedance |
150 Ohms |
Sensitivity |
-57.5 dBV/Pa at 1 kHz |
| Behringer Ultravoice XM8500 Dynamic Cardioid Microphone
With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands.
Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much.
On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal.
Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
Transducer |
Dynamic |
Polar Pattern |
Cardioid |
Frequency Response |
50 Hz to 15 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms |
Output Connectors |
Gold-Plated Pin XLR-3M Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
8.47 oz. (240 g) |
|
Electro-Voice Cobalt CO9
The Co9 is a favorite among vocalists across all musical genres.
Technical Specifications
Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag
|
Reviews
There are no reviews yet.