| Content | Cardioid dynamic microphone for live performances, STAGG SDMP-15.
Polar pattern: Cardioid
Sensitivity: - 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 50 Hz to 15 KHz
Output impedance: 600 ohms 30 % (at 1 KHz)
Connector: XLR output
Cable: 3.5 m (11\'), XLR to 1/4" (6.35 mm) phone plug
Switch: On / off |
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
|
The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels.
Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch
Technical Data
Pick-up pattern Cardioid
Frequency response (microphone) 40.....18000 Hz
Sensitivity in free field, no load (1kHz)
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 47 x 181 mm
Weight 330 g
|
The E-845S is a high-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 46 x 185 mm
Weight : w/o cable 330 g
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
| The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications. It has a metal case and wire mesh grill to ensure exceptional ruggedness.
Key Features:
- Rugged performance microphone designed for backing vocals and instruments
- Rugged wire mesh cap with internal windscreen
- Die-cast metal body
- Complete with stand adapter and zip bag
- On/Off switch
Specifications:
- Polar pattern Cardioid
- Frequency range 40 to 18,000 Hz
- Sensitivity 2.5mV/Pa
- Max. SPL 144 dB SPL
- Recommended load impedance >=2,000 ohms
|
Reviews
There are no reviews yet.