| Content |
- Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
- Maximum load: 25 kg (55.1 lb)
- Material: Steel (pole and plate) and nylon (joint)
- Top plate: Square, sturdy
- Top plate dimensions: 23 x 23 cm (9 x 9“)
- Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
- Quantity: 2 stands
- Weight: 2.75 kg (6 lb) per stand
|
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
|
Universal Horn Clamp for SM98 Microphone |
42" (106cm) Fixed Height Near-Field Monitor / Speaker Stand
![]() Perfect for home, project or professional recording studios
![]() All-steel, arc welded construction. NO fibre or chipboard
![]() Attractive design incorporating cable management
![]() Solid triangular base with adjustable levelling floor spikes
![]() Vertical columns may be sand loaded to deaden sound and increase stability
![]() Sturdy metal top plate measures 11" square (28 cm)
![]() 120 lb (54 kg) weight capacity
Speaker plate dimensions: 11" square - 28cm square
Fixed Height: 42" - 106.6 cm
Base Size: 17.7" square - 45 cm square
Weight capacity: 125 lb - 57kg
Weight: 14.6 lb - 6.6 kg
| Xαρακτηριστικά :
Eιδικά κατασκευασμένες βάσεις δαπέδου για τα ηχεία Wharfedale Linton
Kομψός σχεδιασμός
Προσφέρει εξαιρετικό damping
Tοποθετεί τον άξονα ακρόασης του ηχειου , στο βέλτιστο σημείο
Διαστάσεις (YxΠxB): 43,68 x 29.97 x 33.02 cm. | The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
|
Reviews
There are no reviews yet.