Content |
- Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
- Maximum load: 25 kg (55.1 lb)
- Material: Steel (pole and plate) and nylon (joint)
- Top plate: Square, sturdy
- Top plate dimensions: 23 x 23 cm (9 x 9“)
- Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
- Quantity: 2 stands
- Weight: 2.75 kg (6 lb) per stand
| For small speakers and studio monitors
Fine tune your sound the way it’s meant to be heard
The ISO Stands is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. The ISO-130 isolation stands are the smallest stands within the ISO Stands family.
Offering 14 variations of height and tilt, the ISO-130 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the listening position, providing greater clarity and focus.
Perfect for optimizing the placement and performance of small studio monitors…
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.
Patented IsoAcoustics Isolation
Exciting the supporting surface
The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.
Reducing internal reflections
Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.
- 2 Units
- Height adjustable: 80-203 mm
- Adjustable inclination
- Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the listener
- Isolates studio monitors from the supporting surface
- Dimensions per piece: 130 x 150 mm (support surface)
- Maximum load capacity: up to 9 kg
- Quantity included: 1 pair
| Xαρακτηριστικά :
Eιδικά κατασκευασμένες βάσεις δαπέδου για τα ηχεία Wharfedale Linton
Kομψός σχεδιασμός
Προσφέρει εξαιρετικό damping
Tοποθετεί τον άξονα ακρόασης του ηχειου , στο βέλτιστο σημείο
Διαστάσεις (YxΠxB): 43,68 x 29.97 x 33.02 cm. |
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
| Isolation Pad for Studio Monitors 265 x 330 mm
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
265 mm
Height
40 mm
Depth
330 mm
Weight
0,22 kg |
- Steel tray with isolating foam rests
- Black powder coating
- 40 kg max. load capacity
- Includes spikes and cable clips
This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers.
The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
860 mm
Max height
860 mm
Height adjustment
no
Base type
triangle
Base edge length
445 mm
Max. load
40 kg
Weight
4,87 kg
Additional information
Cable routing (4 Pcs.) and spikes (3 Pcs.) included |
Reviews
There are no reviews yet.