| Content | Phono Stylus
- Universal 500 replacement Stylus, compatible with all Stanton 500 series cartridges
- The number one diamond-tip stylus used by professional DJs worldwide
- 0.7 mil Conical High Polished Diamond Tip
- Tracking force of 2-5 grams
|
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Stylus 2M Black
| Technical data |
|
| Frequency range |
20-31.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / - 0 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
22 µm/mN |
| Stylus type |
Nude Shibata |
| Stylus tip radius |
r/R 6/50 µm |
| Tracking force range |
1,4-1,7 g (14-17 mN) |
| Tracking force, recommended |
1,5 g (15 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
2M Black |
*) Typical value |
Stylus 40
| Technical data |
| | Frequency range | 20-30.000 Hz | | Frequency response | 20-30.000 Hz + 2 / - 3 dB | | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | | Compliance, dynamic, lateral | 25 µm/mN | | Stylus type | Nude FG 70 | | Stylus tip radius | r/R 5/70 µm | | Equivalent stylus tip mass | 0,3 mg | | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | | Tracking force, recommended | 1,5 g (15 mN) | | Tracking angle | 20° | | Stylus colour | Black |
| | | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value | Stylus 2M Red
| Technical data |
|
| Frequency range |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,6-2,0 g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Stylus colour |
Red |
|
|
| Recommended for following cartridges |
2M Red |
*) Typical value |
Reviews
There are no reviews yet.