| Content |
The T.92 USB is a direct-drive professional turntable with built-in USB connectivity. The USB port and supplied software make it easier than ever to digitalize vinyl recordings. With features such as key lock and a pitch range of ±%12, the T.92 USB effortlessly fits in with a regular DJ setup.
- Professional Quality Turntable Featuring High-Torque Direct-Drive Motor
- Sturdy Construction for the Ultimate in Durability
- USB and S/PDIF Outputs for Easily Transferring Music from Vinyl Records to your Mac or PC
- Pitch Control Fader with DSP Key Lock (change tempo without affecting pitch) Selectable Range (+/-8%, 12%)
- Includes Software for Transferring and Editing Music Files
- Includes Audiophile-quality Stanton 500.v3 Cartridge Pre-mounted on Headshell
- S-Shaped Tone Arm for Lower Distortion and Superior Fidelity
- 3 Playback Speeds (33, 45, and 78 RPM) and Quartz Lock
- RCA Stereo Outputs (Phono / Line Switchable)
- 2 Start/Stop Switches for Mix or Battle Setup
- Accessories include RCA Cables, Slip Mat, USB Cable, and Dust Cover
- Includes Cakewalk Pyro Audio Creator LE music and sound editing software
- Dimensions [WxHxD]: 53 cm x 44 cm x 20 cm
| Turntable Section | Measurement | | Frequency Response | 30 Hz to 20 kHz +1/- 2 dB/ RIAA filter | | THD+N | | | S/N Ratio: Line | |
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
| Cartridge & Stylus |
| Replacement Stylus |
VM95 Series |
| Turntable |
| Type |
fully manual |
| Motor |
DC servo-controlled |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
2.75 W |
| Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
| Weight |
8.0kg |
| Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
| The AT-LP5 direct-drive turntable brings advanced technology and sleek, contemporary styling together for performance that looks as good as it sounds. Born of Audio-Technica’s rich analog heritage, the AT-LP5 incorporates a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. It comes outfitted with a lightweight (10 g) AT-HS10 headshell and high-performance AT95EX Dual Moving Magnet stereo cartridge, created specifically for this turntable.
Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5 turntable is a class leader in limiting low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, high-torque motor, ensuring stable, on-axis rotation at 33-1/3 or 45 RPM. The platter is topped by a 5 mm thick rubber damping mat that improves low-frequency reproduction.
The AT-LP5 features a built-in switchable phono/line preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The turntable is also equipped with a USB output for direct connection to a computer, and comes with PC- and Mac-compatible Audacity® software that lets you convert your records to MP3, WAV or other digital audio file formats.
-
- Direct-drive, high-torque motor
-
- Fully manual operation with two speeds: 33-1/3 and 45 RPM
-
- Exclusive AT95Ex Dual Moving Magnet stereo cartridge with replaceable stylus
-
- Lightweight AT-HS10 headshell
-
- J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
-
- Switchable built-in pre-amplifier enables connection to components with or without a dedicated phono input
-
- Anti-resonance, die-cast aluminum platter
-
- Heavy rubber damping mat for improved low-frequency reproduction
-
- Sleek, matte black finish
-
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable, and Audacity recording software for MAC or PC
- Included dust cover and mounting hardware
| Type |
2-speed, fully manual operation |
| Motor |
DC motor |
| Drive Method |
Direct drive |
| Speeds |
33-1/3 RPM, 45 RPM |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.6 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface - USB 2.0 compliant Windows XP, Vista or MAC OS X |
| Power Supply Requirements |
120V AC, 60 Hz |
| Power Consumption |
11 W |
| Dimensions |
450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H |
| Weight |
10.5 kg (23.1 lbs.) |
| Accessories Included |
AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software; cartridge alignment and overhang adjustment template; dust cover with mounting hardware |
| Reloop RP-7000 MK2 Overview
The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).
The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
- Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
- Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Height-adjustable tonearm base (VTA) and anti-skating control
- Satin aluminum material used for tonearm
- Adjustable pitch scale for precise adjustments
- Easily replaceable, freely rotatable LED needle light in aluminum design
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 to 6 seconds)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
- Precision manufactured, die-cast aluminum turntable
- Rubber inlays to reduce vibrations and background noise
- Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range ±8%, ±16%, ±50%
- Additional start/stop button for vertical positioning
- Reverse Function: switch for forward and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no ground required)
- Removable mains and cinch cable
- Shock-absorbing feet to insulate against vibrations
|
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO out (gold-plated), 1x GND
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
|
- Accurate playback
- Direct-drive motor
- Vertical tracking
- Adjustable insulator feet
- Solid construction
- Removable dust cover
General
- Colors Dark ebony
- Dimensions 500 x 394 x 185mm (W x D x H)
- Weight 18.5 kg
- Power Supply AC 100-240V, 50/60Hz
- Power consumption <4W
- Stdby Power consumption Less than 0.3W
- Carton maximum Dimensions 615 x 515 x 335 mm (W x D x H)
- Carton Weight 24.0 kg
- What's in the box Platter mat, Dust cover, Power cable, RCA cable and ground cable, Headshell, Overhang gauge, Screw set for cartridge mount (10, 13, 18mm), 2 x Cartridge spacers (1 mm), 2 x Plastic Washer, Screw driver, Counter weight, Sub-counter weight, Denon EP adapter/weight
|
Reviews
There are no reviews yet.