Content |
Laser color: Green Laser power: Green 50mW Wave length: Green 532nm Play mode: Sound Control, Auto, DMX 512 Laser patterns: more than 64 patterns Scanner: N1.8 high precision stepper motor Power: 100-240V, 50/60HZ, 20W
S-50 | Model: | S-50 Green Laser Light | Scan System: | High Speed Step Motor Drive and Grating Scan | Laser Color: | 【Green】 | Laser Power: | 【Green Laser】: 50mw | Wavelength: | 【Green Laser】: 532nm | Modulation: | 0~20KHz TTL Modulation | System Port: | DMX512 input and output port | Control Mode: | Sound Active, Automatic, DMX512(7 channels),Maser/Slave | Demo Effect: | Green Laser Beam Show, more than one hundred of patterns. | Safety Capacity: | Sound active mode with the function of shut-off if there is no music. Master/Slave mode, DMX512 mode , will shut off automatically without trigger signal. Safer to human and environment. | Laser Class: | 3B | Work Enviroment: | 10-35℃ Indoor | Power Supply: | AC 110/220v 50-60HZ | Rating Power: | 20W | Cooling System: | Air cooling | Product Size: | 205*145*80mm | Net Weight: | 1.5kg | Work Place: | Disco, KTV, Bars, Clubs, Family party etc. |
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
- Animation laser with high speed 5 Kpps stepper motor
- 60° scan angle
- Precision beams with minimum divergence
- 32 pattern presets
- DMX, sound and infrared control plus auto function
- Master, slave and standalone modes
- Display with 4 function keys for easy manual operation
- Rugged aluminium enclosure with key switch
- Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Scanner
High speed stepper motors, 5 kpps
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
IEC power connector male
Weight
2 kg
| Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only the LLUKE 1000RGB delivers an output 1,000 mW and red, green and blue color mixes. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the LUKE 1000 RGB the ideal choice for highly professional laser shows..
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE1000RGB
- Product type: LASER
- Total power: 1000 mW
- Colour spectrum: RGB
- Wavelength(s): 638 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 1,5 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 100 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Work LX 80G DMX Laser
LX 80G is a high performance features with 80 mW and high precision micro-step scan motors
controlled by high speed processor.
It can be controlled by DMX signal with 7 channels or autonomous through its pre-recorder programs
being able to synchronize more than one LX 80 G (up to 100 units)
The program can be operated with audio signal thanks to the built-in microphone. The effects capacity
is enormous with up to 200 available effects that allow a great combinations variety and the TTL ?blanking?
function, very useful in discotheque and club performances. It is also possible to control PAN/TILT
movements via DMX making a versatile set. The 80 mW REAL power diode is very effective, creating
a powerful beam.
Device: Green Laser.
> Laser Source: 30mW @ 532nm.
> Scan: High precission micro-step motors
precisi?n.
> Control: High capacity processor.
> Operating modes: DMX512, Autonomous, Audio.
> aster/Slave function con linking capacity up to 100 units.
> Effects: 200 effects.
> Supply: 220V AC 50Hz
> Dimensions (mm): 250 x 230 x 190
(L x W x H).
> Weight:3.8 kg.
|
Reviews
There are no reviews yet.