AKG K72 Professional hi-fi stereo studio headphones

50.84 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
AKG K-72 headphones – closed-back and over-ear design, 32 Ohms impedance, sensitivity 112 dB SPL/ V, frequency range: 16 – 20000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200g

 

Read more

AKG K-72 headphones – closed-back and over-ear design, 32 Ohms impedance, sensitivity 112 dB SPL/ V, frequency range: 16 – 20000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200g
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AKG K72 Professional hi-fi stereo studio headphones”

Your email address will not be published. Required fields are marked *

You may also like…

Quick Comparison

AKG K72 Professional hi-fi stereo studio headphones removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAUDIO TECHNICA ATH-M20X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT990PRO Open type headphones removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones remove
NameAKG K72 Professional hi-fi stereo studio headphones removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAUDIO TECHNICA ATH-M20X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT990PRO Open type headphones removeBEYERDYNAMIC DT 150 250 Ω HEADPHONES removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones remove
Imagebeyerdynamic-dt-990-pro-perspective headphones open typeBeyerdynamic-dt-150-250-ohm-headphones-black-face-1Beyerdynamic t1 tesla close type headphones hi-fi
SKUK 72DT-770M 80ATHM20XDT-990 PRODT-150T1 (3rd generation)
Rating
Price 50.84 incl. GR VAT 149.00 incl. GR VAT 51.70 incl. GR VAT 139.00 incl. GR VAT 240.99 incl. GR VAT 899.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

In stock (can be backordered)

AvailabilityIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • High-end stereo headphones for sophisticated music enjoyment at home
  • Tilted Tesla drivers ensure a precise and spatial sound signature
  • Double-sided, detachable connection cable made from ultra-high-purity OCC7N copper and covered with fabric
  • Breathable, replaceable velour ear pads with memory foam
  • Handmade in Germany
ContentAKG K-72 headphones - closed-back and over-ear design, 32 Ohms impedance, sensitivity 112 dB SPL/ V, frequency range: 16 - 20000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200gDT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise. The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. ▲ Closed headphone ▲ Excellent ambient noise attenuation (35 dBA) ▲ Superb sound quality with high sound pressure level (105 dB) ▲ Extended frequency range ▲ Single-sided cable with volume control ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Excellent comfort for long-term wearing, softskin ear pads ▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding ▲ Single-sided cable ▲ Supplied in a carrying case (nylon)
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 80 ohms
Headphone frequency response The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. 5 - 30.000 Hz
Nominal sound pressure level The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. 105 dB
Construction Circumaural (around the ear)
Cable & plug Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 300 g
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit
Specifications
  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: Copper-clad aluminum wire
  • Frequency Response: 15 - 20,000 Hz
  • Maximum Input Power: 700 mW at 1 kHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Weight: 190 g (6.7 oz), without cable and connector
  • Cable: 3.0 m (9.8'), straight, left-side exit
  • Accessory Included: 6.3 mm (1/4“) snap-on adapter
DT 990 PRO Professional headphone for studio applications, open Features Open, diffuse-field systems Professional version of the oftentimes awarded DT 990 Excellent sound reproduction Robust spring steel headband Single-sided cable Soft replaceable ear cushions Gold plated stereo mini jack and 1/4" adapter Technical Specifications Transducer type Dynamic Operating principle Open Weight without cable 250 g Frequency response 5 - 35,000 Hz. Nominal impedance acc. to IEC 60268-7 250 Ω /System Nominal SPL acc. to IEC 60268-7 > 96 dB Nominal THD acc. to IEC 60268-7 Power handling capacity acc. to IEC 60268-7 100 mW Sound coupling to the ear Circumaural Average pressure on ear acc. to IEC 60268-7 3.5 NBeyerdynamic DT 150 The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios and other audio monitoring applications where size, comfort and performance are primarily requirements. Due to its closed design it features excellent ambient noise isolation for reference monitoring.
  • Transducer type: Dynamic
  • Operating principle: Closed
  • Frequency response: 5 - 30,000 Hz
  • Nominal impedance: 250 Ω
  • Nominal SPL: 97 dB
  • Power handling capacity: 100 mW
  • Sound coupling to the ear: Circumaural
  • Headband pressure: 4.5 N
  • Ambient noise attenuation: approx. 20 dBA
  • Weight (without cable): 250 g
 

Technical Data

Operating Principle: Open
Transmission Type: Wired
Earpad material: Velours, memory foam
Nominal Impedance Headphones: 32 ohms
Weight headphones without cable: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: double-sided detachable cable, 3 m length, gold-plated mini stereo jack (3.5 mm) & 1/4" adapter (6.35 mm)
 
Weight0.50 kg0.27 kg1.00 kg0.27 kg0.500 kg560 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.27 kg
Weight 1.00 kg
Weight 0.27 kg
Weight 0.500 kg
Weight 560 kg