AKG K-92 STEREO STUDIO HEADPHONES

57.03 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
AKG K-92 headphones – closed-back and over-ear design, 32 Ohms impedance, sensitivity 113 dB SPL/ V, frequency range: 16 – 22000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200g

 

Read more

AKG K-92 headphones – closed-back and over-ear design, 32 Ohms impedance, sensitivity 113 dB SPL/ V, frequency range: 16 – 22000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200g
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AKG K-92 STEREO STUDIO HEADPHONES”

Your email address will not be published. Required fields are marked *

You may also like…

Quick Comparison

AKG K-92 STEREO STUDIO HEADPHONES removeAKG K 701 WHT HI-END HEADPHONES removeBEYERDYNAMIC DT880 PRO 250ohm Headphones removeAUDIO TECHNICA ATH-M20X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT770 PRO 250 Ohm Headphones removeBEHRINGER HPS5000 Closed-Type High-Performance Studio Headphones remove
NameAKG K-92 STEREO STUDIO HEADPHONES removeAKG K 701 WHT HI-END HEADPHONES removeBEYERDYNAMIC DT880 PRO 250ohm Headphones removeAUDIO TECHNICA ATH-M20X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC DT770 PRO 250 Ohm Headphones removeBEHRINGER HPS5000 Closed-Type High-Performance Studio Headphones remove
Imagebeyerdynamic-dt-880-pro-perspective-1 headphones semi open typehps5000 closed back headset headphones microphone podcast gaming
SKUK 92K 701 WHTDT 880 250ATHM20XDT-770 PRO 250E005304
Rating
Price 57.03 incl. GR VAT 159.00 incl. GR VAT 199.00 incl. GR VAT 51.70 incl. GR VAT 144.50 incl. GR VAT 27.50 incl. GR VAT
Stock

Available on backorder

Only 4 left in stock

Only 1 left in stock (can be backordered)

Available on backorder

Only 2 left in stock (can be backordered)

In stock (can be backordered)

AvailabilityAvailable on backorderOnly 4 left in stockOnly 1 left in stock (can be backordered)Available on backorderOnly 2 left in stock (can be backordered)In stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionOpen Back Headphones with Shaped 3D Form Earpads Revolutionary flat-wire voice coil Patented AKG Varimotion Diaphragm Cushioned genuine-leather headband Specially shaped "3D-Form" ear pads Actual Colour: White
  • Wide frequency response
  • Comfortable to wear
  • High dynamic range
  • 1/8" connector and 1/4" adapter
  • 6' coiled cable with oxygen-free copper wires
ContentAKG K-92 headphones - closed-back and over-ear design, 32 Ohms impedance, sensitivity 113 dB SPL/ V, frequency range: 16 - 22000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200gK 701 * Revolutionary flat-wire voice coil technology * Patented AKG Varimotion ultra-precision two-layer diaphragm * Self-adjusting cushioned genuine-leather headband * Bi-wiring, high-performance cable with 1/4" jack plug * Comfortable, specially shaped "3D-Form" ear pads * Complete with stylish storage cradle * Individually tested and numbered Whether you prefer the holistic approach or like to listen analytically, the K 701 will turn perception into pure enjoyment. AKG is the first manufacturer in the world to use revolutionary flat-wire technology in headphones, namely, the K 701. The result is a truly dramatic sound that places every musician at their correct location with pinpoint accuracy. This kind of agility, spaciousness, brilliant highs, and velvety, punchy bass is simply miraculous.These superlative open-back dynamic headphones provide an outstandingly accurate sound and excellent imaging. Try the K 701 and find out what ingenious headphone engineering can do for you. SPECIFICATIONS: Type  Open-back, dynamic headphones Efficiency  105 dB/V Frequency range  10 Hz to 39.8 kHz Rated impedance  62 ohms Max. input power  200 mW Cable  bi-wiring, single-sided, 99.99% oxygen-free cable, 3 m (10 ft.) Connector  1/4" hard gold platedSpecs:
  •     Semi - Open
  •     Innovative bass refelx system
  •     Rugged headband cosntruction
  •     Single-sided coiled cable
  •     Soft headband pad
  •     Gold plated stereo mini jack (3.5mm) and 1/4" adapter
  •     Transducer type: Dynamic
  •     Frequency response: 5 - 35,000 Hz
  •     Nominal impedance: 250 ohm
  •     Nominal SPL : 96 dB
  •     T.H.D: < 0.2%
  •     Power handling capacity: 100 mW
  •     Sound coupling to ear: Circumaural
  •     Weight (without cable) 295 g
 
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit
Specifications
  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: Copper-clad aluminum wire
  • Frequency Response: 15 - 20,000 Hz
  • Maximum Input Power: 700 mW at 1 kHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Weight: 190 g (6.7 oz), without cable and connector
  • Cable: 3.0 m (9.8'), straight, left-side exit
  • Accessory Included: 6.3 mm (1/4“) snap-on adapter
DT770 Closed reference headphone for control and monitoring applications (optionally with limiter). The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time. ▲ Closed, diffuse-field studio headphone ▲ "Bass reflex" technology for improved bass response ▲ Comfortable fit due to rugged, adjustable, soft padded headband construction ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Single-sided cable ▲ NEW - Limiter (Optional) ▲ Velour, circumaural ear pads  
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 250 ohms
Headphone frequency response 5 - 35.000 Hz
Nominal sound pressure level 96 dB
Construction Circumaural (around the ear)
Cable & plug Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 270 g
In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones. Budget Headphones Closed Type with High-performance Studio Headphones Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget. Behringer HPS5000 Headphones Features at a Glance:
  • Ultra-wide frequency response
  • High-definition bass and super-transient highs
  • Highly-efficient cobalt capsule
  • Outstanding dynamic range
  • Single-sided coiled cord with oxygen-free copper wires
  • Optimised oval-shaped ear cups
  • 1/8'' connector plus 1/4'' adapter included
  • Ultra-rugged headband construction
  • Designed and engineered in Germany
  Headphone
Driver Size 1.6" / 40 mm
Driver Type Dynamic
Magnet Type Cobalt
Design Over-Ear (Circumaural)
Earcup Style Closed-Back
General
Frequency Response 20 Hz to 20 kHz
Sensitivity 113.5 dB at 1 kHz
Impedance 32 Ohms
Maximum Power Handling 100 mW
Connectivity
Audio Connector to Source 1/8" / 3.5 mm
Adapter (Included) 1/4“
Cable
Cable Length 3.3 to 8.2\' / 1 to 2.5 m (Coiled)
Weight0.50 kg0.25 kg0.27 kg1.00 kg0.27 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.25 kg
Weight 0.27 kg
Weight 1.00 kg
Weight 0.27 kg
Weight 0.20 kg