JBL Studio 225C 2.5-way Dual 4″ Center Channel Loudspeaker (Black,Brown)

2.5-way Dual 4" Center Channel Loudspeaker
* Dual 100mm (4“) PolyPlas low-frequency transducers
* High Definition Imaging (HDI) horn design - 25mm (1“) CMMD® Lite high frequency dome
* Recommended amplifier power: 20 – 125W, 60Hz – 22kHz, 88dB, 8 Ohms, Slipstream rear-firing bass port
Gold-plated binding-post speaker terminals, 165mm x 535mm x 187mm, Weight: 7.9 kg

Frequency Response: 32 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550
Drive Unit Complement: 2 x 8 long-throw RDT bass drivers
1 x 4" RDT Mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 288 x 800 x 368 mm
(11 5/16 x 31 1/2 x 14 1/2 inch)
Stand External Dimensions -
Including Plinth Feet
(H x W x D): 335 x 610 x 463 mm
(13 13/16 x 24 x 18 1/4 inch)
Weight: 33.5 Kg (73.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Frequency Response

60Hz - 35KHz

Sensitivity

86dB

Nominal  Impedance

6 Ohms

Power Handling Single (RMS)

100 Watts

System Power Handling (RMS)

150 Watts

Recommended Amplifier Requirements

40-150 Watts

Maximum SPL (dBA)

106

Bass Alignment

Bass reflex - Rear ported

Driver complement

2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter

Cabinet Dimensions (H x W x D)

125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)

Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)

125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)

Weight

3.6kg (7lb 14oz)

HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.

MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded. 

LF unit 
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.

Power Handling  150W max

Frequency response +/-6db 55Hz to 23kHz

Sensitivity 90 db/W

Impedance 8 ohms

Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.

Terminals Gold-plated 2-way binding posts.

Weight
(excl. packaging) 8kg

Dimensions
Width 530mm
Height 170mm
Depth 196 mm

Power Handling (RMS / Max.) 75 / 150 watts Sensitivity (2.8V/1m) 90 dB Impedance 4 – 8 Ohms Frequency Response 40 - 34000 Hz Recommended Amplifier Output 20 - 150 Watts Dimensions (WxHxD) 420 x 145 x 195 mm Weight 4.9 kg

Frequency Response: 45Hz- 100kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 60 - 200 W
Bass Alignment: Rear Ported HiVe II Technology
Mid / H.F Crossover Frequency: 1800 Hz
Bass Low Pass Crossover Frequency: 250 Hz
Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand: Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches)
Stand Dimensions: Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches)
Weight: 19 Kg (41.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES