JBL Studio 235C Dual 2.5-way 6.5″ Center Channel Loudspeaker (Black)

2.5-way 6.5" Center Channel Loudspeaker
* Dual 165mm (6.5“) PolyPlas low-frequency transducers
* High Definition Imaging (HDI) horn design - 25mm (1“) CMMD® Lite high frequency dome, Recommended amplifier power: 20 – 150W
* 55Hz – 22kHz, 91dB, 8 Ohms, Slipstream rear-firing bass port, Gold-plated binding-post speaker terminals, 194mm x 645mm x 249mm,
Weight: 11.9 kg

HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.

MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded. 

LF unit 
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.

Power Handling  150W max

Frequency response +/-6db 55Hz to 23kHz

Sensitivity 90 db/W

Impedance 8 ohms

Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.

Terminals Gold-plated 2-way binding posts.

Weight
(excl. packaging) 8kg

Dimensions
Width 530mm
Height 170mm
Depth 196 mm

Enclosure     Sealed/Ported
Tweeter     Ring Radiator
Midrange size (inches)     3-1/4
Woofer size (inches)     6-1/2
Connector Type     Post
Power Range     20-250
Sensitivity     88 dB
Impedance (Ohms)     8
Frequency Response     50-30k Hz
Height (inches)     9-1/16
Width (inches)     28-11/16
Depth (inches)     14
Weight     42.3 lbs
Parts Warranty     5 Years
Labor Warranty     5 Years

ALSO AVAILABLE IN "EBONY" COLOR

System Format:    2 Way
Frequency Response:    55 Hz - 60 kHz
Sensitivity (1W@1M):    89 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    111.5 dBA
Power Handling (RMS):    150 W
Recommended Amplifier Requirements (RMS):    100 - 150 W
Bass Alignment:    Sealed Cabinet
Crossover Frequency:    2.8 kHz
Drive Unit Compliment:    2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands:    6 Kg (13.25 lbs)

AVAILABLE IN SIX COLOR FINISHES

Power handling (watts): 170 (RMS)  
Sensitivity (dB): 90  
Nominal impedance (ohms): 8  
Magnetically shielded
W x H x D (mm): 480 x 178 x 195  
Weight (kg): 9  
Frequency response (Hz): 35 - 45,000  
Connections: Gold-plated 4mm banana socket/binding posts  
Bass port Rear reflex  
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil  
Supplied accessories: Removable grille  
Finish: black ash/ walnut

System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)

254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands: 18.9 Kg (41.6lbs)

AVAILABLE IN SIX COLOR FINISHES