JBL Studio 280 3-way Dual 6.5″ Floorstanding Loudspeaker (Black,Brown)

3-way Dual 6.5" Floorstanding Loudspeaker
* Dual 165mm (6.5“) PolyPlas low-frequency transducer, Single 100mm (4“) PolyPlas midrange transducer
* High Definition Imaging (HDI) horn design- 25mm (1“) CMMD® Lite high frequency dome, Recommended amplifier power: 20 – 200W
* 40Hz – 22kHz, 89dB, 8 Ohms, Braced enclosure with Slipstream rear-firing bass port, Dual gold-plated binding-post speaker terminals with
biwire capability, 1124mm x 237mm x 284mm, 20.5kg

Single Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 6.5” long-throw RDT® bass drivers
1 x 4” RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 35 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Rear Ported HiVe®II technology
Sealed Mid-range TLE®
Mid / H.F Crossover Frequency: 3600 Hz
Bass Low Pass Crossover Frequency: 600 Hz
Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches)
Weight (each) Including Plinth: 33Kg (72.7 lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers

System Format:    3 Way
Frequency Response:    32Hz - 35kHz
Sensitivity (1W@1M):    90dB
Nominal Impedance:    4 Ohms
Maximum SPL (dBA):    116.2
Power Handling (RMS):    175W
Recommended Amplifier Requirements (RMS):    50 - 175W
Bass Alignment:    Bass reflex.
Twin HiVe®II port System
Tweeter Crossover Frequency:    LF/MF: 300Hz
MF/HF: 2.2 kHz
Drive Unit Complement:    2 x 6" RST® Bass drivers.
1 x 6" RST® Bass/Mid driver.
1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)
inc. plinth & feet    960 x 275 x 388 mm
(37 13/16 x 10 13/16 x 15 1/4 inch)
Individual Weight:    21.76 Kg (47.88 lb)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak