Content | 3-way 6.5" Floorstanding Loudspeaker
* 165mm (6.5“) PolyPlas low-frequency transducer, Single 100mm (4“) PolyPlas midrange transducer
* High Definition Imaging (HDI) horn design- 25mm (1“) CMMD® Lite high frequency dome, Recommended amplifier power: 20 – 200W
* 45Hz – 22kHz, 88dB, 8 Ohms, Braced enclosure with Slipstream rear-firing bass port, Dual gold-plated binding-post speaker terminals with
biwire capability, 1010mm x 237mm x 244mm, 16.1 kg |
Dimensions | Metric :5-1/4" W x 5-1/8" D x 42" H | 13.3 x 13.0 x 106.7 cm
Height with Base | Metric :42-7/8" | 104.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition midrange drivers; Two 4-1/2" high definition bass drivers; Two 4-1/2" pressure coupled bass radiators
Base Dimensions | Metric :8-3/4” W x 8-5/8” D | 22.2 x 21.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :35 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 225 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs | 10.4 kg
Warranty :5 Years
|
If itʼs hard to put the sound of the CM9 into words, thatʼs just as well. This top-of-the-range floorstanding speaker will fill even the largest domestic spaces with music so richly detailed, and so startlingly lifelike, that it will leave you speechless.
The three-way CM9 delivers truly commanding bass with the aid of twin 165mm paper/Kevlar® cone drive units. An FST® driver, with its characteristic compression surround supporting the outer edge of the distinctive Kevlar® cone, is specially developed for outstanding midrange performance. The CM9ʼs Nautilus™ tube-loaded aluminium dome tweeter keeps high frequencies crisp and sharp all the way up to 50kHz and beyond.
The quality of CM Series drive units has made it possible to use minimalist crossovers throughout the whole range. The resulting gentle transition between drivers avoids the unnaturally rapid changes in dispersion that bedevil more complex designs, while the high quality components, carefully chosen after exhaustive listening tests, ensure that as little as possible gets between you and the sound of the original recording.
All CM Series speakers come with aluminium driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, or a highly polished gloss black.
Technical features
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
Description 3-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FST midrange
2x ø165mm (6.5 in) paper/Kevlar® cone bass
Frequency range -6dB at 30Hz and 50kHz
Frequency response 56Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 89dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
System Format: 3 Way Frequency Response: 35 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 114.5 dBA Power Handling (RMS): 150 W Recommended Amplifier Requirements (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 400 Hz M.F - H.F: 2.6 kHz Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 951 x 170 x 300 mm (37 7/16 x 6 11/16 x 11 13/16 inch) Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Driver Complements Subwoofer 2 - 6" Diameter (15.24cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm) Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm) Dynamic Balance Ehanced Ring Radiator tweeter Electrical Overall Frequency Response 20Hz-40kHz 22Hz-40kHz Lower -3dB Limit 38Hz dB 42Hz dB Upper -3dB Limit 30kHz dB 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-300 w/channel 20-250 w/channel Efficiency 88 dB 88 dB Crossover Orth Crossover Orth Crossover Crossover (mid-high array) 3000Hz 2800Hz Crossover (subwoofer) 100HZ 100Hz Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts Dimensions Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D (129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D (119.38cm H x 21.11cm W x 36.51cm D) Footprint Size 10 1/2" W x 20 5/16" D (26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D (23.50cm W x 41.27cm D) Mounting Options floor floor Enclosure Type Sealed Sealed Enclosure Type (subwoofer) Dual PowerPort Dual PowerPort bass venting Shipping/Other Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs) Shipping unit: each each Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs) Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
Dimensions | Metric : 4" D x 4-1/16" W x 19-9/16" H | 10.1 x 10.3 x 49.7 cm
Base Dimensions | Metric :5-1/2" D x 6-1/2" W | 14 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition bass/midrange drivers; Two 3-1/2" pressure coupled bass radiators
A/V Receiver Crossover Setting :120 Hz
Frequency Response :60 Hz – 30 kHz
Inputs :One pair of 5 way binding posts
Impedance :Compatible with 8 Ohms outputs
Enclosure :Aircraft grade extruded aluminum
Sensitivity :89 dB
Available Finishes :Gloss Black
Recommended Associated Amplifier Power :10 – 175 watts
Accessories :Wall bracket; Glass Base
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Packaging :One to a carton
Weight | Metric :8 lbs | 3.6 kg
Warranty :5 Years |
Reviews
There are no reviews yet.