Content |
For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again.
KRK's KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK's trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.
Type: | Active Subwoofer | Woofer: | 10'' | Midrange: | - | Tweeter: | 2'' | Amplifiers Power: | 160W | Input/Output Plugs: | XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right, 1/4" footswitch / XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right | Frequency Response: | 31Hz - 110Hz | Εqualizer: | - | Dimensions (W x H x D): | 38,2 mm x 35,5 mm x 40,8 mm | Weight: | 15,6 κιλά |
|
Product details
Woofer: | 10-inch black Glass-Composite Cone | Frequency response: | 20Hz - 200Hz | Crossover frequency: | 50Hz - 130Hz adjustable | Amplifier Power: | 300W | S/N Ratio (A weighted): | >95dB | THD + N @ Rated Power: | 0.08% | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | Phase reverse: | 0 / 180° switch | Ground Lift switch: | On / Off | Bypass Footswitch: | On / Off | Available colors: | Red, Black | Net weight: | 17.6kg / 38.7lb | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
Beef up your studio's low-end response
The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.
A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.
JBL LSR 310S Features:
- 200W Class-D Amplifier
- 113dB Peak Output
- 10" Speaker
- Slip Stream Bass Port
- Balanced XLR Input
- Extended Low Frequency Effects
- 3 Selectable Crossover Settings
|
- 8' bass-reflex powered subwoofer delivers low frequencies down to 22Hz
- 22Hz - 150Hz frequency response
- High-power 150W amplifier exclusively designed for low frequencies
- LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
- PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
- XLR and TRS phone for outputs and XLR for L and R and EXT SUB
Type |
Studio monitor subwoofer |
Woofer |
8'' |
Midrange |
- |
Tweeter |
- |
Amplifiers Power |
150W |
Input/Output Plugs |
XLR3-31 type (balanced) x2, PHONE (balanced) x2 / Out: XLR3-32 type (balanced) x2 (L&R) |
Frequency Response |
22Hz - 160Hz |
Εqualizer |
Yes (Low cut switch) |
Dimensions (W x H x D) |
300mmx350mmx389mm |
Weight |
12.5kg |
|
12" Subwoofer
Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.
So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.
All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.
Tech Talk
Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.
The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!
The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.
All in all, the ThunderStorm subwoofers will make any system sound better and more complete.
As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.
Passive Radiator
The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.
Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.
The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.
Frequency response curve
Product | TS112 | Description | Subwoofer | Dimensions (WxHxD) [mm] | 390 x 560 x 508 | Dimensions (WxHxD) [“] | 15.35 x 22.05 x 20 | Free-field frequency range (-3dB) | 24Hz - 300Hz | Woofer | 300mm/12“ | Maximum SPL @ 1m | 112dB | Number of amplifiers | 1 | Total short-term output power | 400W | Protection limiter | Yes | Settings |
| System volume (Satellite & Sub) | -inf. - +6dB | Subwoofer volume | -inf. - +6dB | Level-lock dip switch | Yes | Filter-lock dip switch | Yes | Input level dip switch | +7dBu/+22dBu | Phase inversion | 0°/180° | Switchable Satellite filter | flat/80Hz | Variable Subwoofer filter | 60Hz-140Hz + LFE | Remote control | Sys. & Sub. Vol. | Connectors |
| XLR in left (impedance) | (10k) | XLR in right (impedance) | (10k) | XLR in LFE (impedance) | (10k) | XLR out satellite left (impedance) | (10k) | XLR out satellite right (impedance) | (10k) | XLR out (LFE) (impedance) | (10k) | Power consumption |
| Standby | | Full output | 410VA | Misc. |
| Weight kg/lb. | 25.5 / 56.2 |
|
Genelec 7060B Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 108 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10" Active | | 120 W | | H x W x D 527 x 462 x 363 mm | | 26 Kg (57 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
Reviews
There are no reviews yet.