KRK 10-S2 Active Studio Subwoofer ( Piece )

Discontinued

399.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again. KRK’s KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8″ studio monitor. The […]

 

Read more

For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again.

KRK’s KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8″ studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK’s trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

 

Type: Active Subwoofer
Woofer: 10”
Midrange:
Tweeter: 2”
Amplifiers Power: 160W
Input/Output Plugs: XLR Left/Right, 1/4″ TRS Left/Right, RCA Left/Right, 1/4″ footswitch / XLR Left/Right, 1/4″ TRS Left/Right, RCA Left/Right
Frequency Response: 31Hz – 110Hz
Εqualizer:
Dimensions (W x H x D): 38,2 mm x 35,5 mm x 40,8 mm
Weight: 15,6 κιλά

 

Weight 15.60 kg

Reviews

There are no reviews yet.

Be the first to review “KRK 10-S2 Active Studio Subwoofer ( Piece )”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK 10-S2 Active Studio Subwoofer ( Piece ) removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeGENELEC 7071A ACTIVE SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (BLACK) remove
NameKRK 10-S2 Active Studio Subwoofer ( Piece ) removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeGENELEC 7071A ACTIVE SUBWOOFER removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (BLACK) remove
Image
SKUH00KR00036TS107TS110SE7261A7071AGibbon 10B
Rating
Price 399.00 incl. GR VAT 499.00 incl. GR VAT 895.00 incl. GR VAT 2,225.94 incl. GR VAT 3,475.03 incl. GR VAT465.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again.

KRK's KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK's trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

 

Type:Active Subwoofer
Woofer: 10''
Midrange: -
Tweeter: 2''
Amplifiers Power: 160W
Input/Output Plugs: XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right, 1/4" footswitch / XLR Left/Right, 1/4" TRS Left/Right, RCA Left/Right
Frequency Response: 31Hz - 110Hz
Εqualizer: -
Dimensions (W x H x D): 38,2 mm x 35,5 mm x 40,8 mm
Weight: 15,6 κιλά

 

7" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS107 is the smallest model in the range of EVE Audio subwoofers and features a very efficient 100W PWM amplifier that drives a proprietary 6.5" woofer. This guarantees a frequency response of down to 36Hz up to 300 Hz, for a maximum output power of 102 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS107
Description Subwoofer
Dimensions (WxHxD) [mm] 230 x 355 x 300
Dimensions (WxHxD) [“] 9.06 x 13.98 x 11.81
Free-field frequency range (-3dB) 36Hz - 300Hz
Woofer 165mm/6.5“
Maximum SPL @ 1m 102dB
Number of amplifiers 1
Total short-term output power 100W
Protection limiter YES
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch YES
Filter-lock dip switch YES
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 120VA
Misc.
Weight kg/lb. 8.2 / 18.1

10" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS110
Description Subwoofer
Dimensions (WxHxD) [mm] 330 x 485 x 430
Dimensions (WxHxD) [“] 12.99 x 19.09 x 16.93
Free-field frequency range (-3dB) 28Hz - 300Hz
Woofer 250mm/10“
Maximum SPL @ 1m 108dB
Number of amplifiers 1
Total short-term output power 250W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 250VA
Misc.
Weight kg/lb. 19.6 / 43.2

Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.

The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.

The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.

108 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
GLM tone controls
10“
120 W
H x W x D  527 x 462 x 363 mm
27 Kg (59 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

Genelec 7071A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

118 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
2 x 12“
500 W
H x W x D  755 x 803 x 490 mm
81 Kg (178 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Product details

Woofer:10-inch black Glass-Composite Cone
Frequency response:20Hz - 200Hz
Crossover frequency:50Hz - 130Hz adjustable
Amplifier Power:300W
S/N Ratio (A weighted):>95dB
THD + N @ Rated Power:  0.08%
Inputs:2x XLR, 2x TRS, 2x RCA Connectors
Outputs:2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance:20 kOhm balanced, 10 kOhm unbalanced
Phase reverse:0 / 180° switch
Ground Lift switch:On / Off
Bypass Footswitch:On / Off
Available colors:Red, Black
Net weight:17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in
Weight15.60 kg8.20 kg19.60 kg27.00 kg81.00 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.60 kg
Weight 8.20 kg
Weight 19.60 kg
Weight 27.00 kg
Weight 81.00 kg
Weight 8.00 kg