Content |
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 65 - 20000 Hz Frequency Response (-10 dB) 45 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 45 Hz Sensitivity 1 W/1 m 100 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2151 HF Transducer DH3 Crossover Frequency 1750 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.2 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 475 mm (18.7“) Width 439 mm (17.28“) Depth 655 mm (25.79“) Weight Net 23.5 kg (51.81 lbs) |
PRICE PER UNIT ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Mid-Woofer | | Number | 1 | Basket Ø | 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 42 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥106 dB | Max. peak | ≥114 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 20.3 lb (9,2 kg) | Magnetically shielded | No | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
|
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 70 - 20000 Hz Frequency Response (-10 dB) 55 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 60 Hz Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 132 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2121 HF Transducer DH3 Crossover Frequency 1600 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.4 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 440 mm (17.32“) Width 364 mm (14.33“) Depth 573 mm (22.56“) Weight Net 19.8 kg (43.65 lbs) |
Reviews
There are no reviews yet.