LD Systems LDMEI1000G2 – In-Ear Monitoring System wireless

LD Systems MEI1000G2

The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.

The earphones have been designed for a high wearing comfort, and a multifunction display provides all the relevant system information. Operation time exceeds 12h with high quality batteries. A 19" rackmount kit and a rugged ABS plastic carrying case complete the MEI 1000 G2 package.

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis

• Model name: LDMEI1000G2BPR
• Product type: Belt pack receiver
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• Frequency response: 60 Hz - 16 kHz
• S/N ratio: 80 dB
• THD: < 1 %
• Audio outputs: 3.5 mm jack
• Max. audio output level: 100 mW
• Controls: Up, Down, Escape, Set, Volume
• Indicators: LC Display, Low Battery, Power
• Power supply: 2 x 1.5 V AA
• Operating time: > 13 hrs., battery-dependent
• Width: 65 mm
• Height: 90 mm
• Depth: 24 mm

• Model name: LDMEI1000G2T
• Product type: Transmitter
• Radio frequency range: 823 - 832 and 863 - 865 MHz
• Channels: 96 (8 groups of 12 channels)
• Transmission method: FM, stereo
• RF output: 10 mW
• Frequency response: 60 Hz - 16 kHz
• S/N ratio: 85 dB
• Inputs: 2
• Input connections: XLR/ 6.3 mm jack (combo)
• Input impedance: 14 kOhm
• Antenna connector: TNC
• Controls: up, down, set, power, volume headphone, input level, pad
• Indicators: LC display
• Power supply: 12 - 18 V DC
• Width: 200 mm
• Height: 44 mm
• Depth: 96 mm
• Accessories (included): Antenna, power supply, headphones

• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 518 - 782 MHz operating range

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 "AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

 M3 IEM Brochure 989 KB

 M3 Owners Manual 6.24 MB

 M3 License Options 403 KB

 M3 Declaration of Conformity 221 KB

 Audio-Technica's advanced M3 IEM system offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences. The stereo monitor system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver. While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¼" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display

• High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
• 1321 selectable UHF channels with automatic frequency scanning
• Up to 16 simultaneous systems per frequency band
• Three receiver modes: Personal Mix, stereo, and mono
• Personal Mix Control allows volume and mix control of two independent signals at the receiver
• LCD information display offers step-through menus for setting preferences
• XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
• Adjustable squelch eliminates annoying static
• Pilot tone protects against RF interference when transmitter is turned off
• Multi-level limiter (defeatable) helps protect hearing from sudden peaks
• Portable system is quick to load and set up
• Reduces on-stage audio clutter for better overall mix & less feedback
• Use any number of Stereo Receivers (with individual mixes) on the same frequency
• Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
• Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
• Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input

• Operating Frequencies: Band E: 790.000 to 822.000 MHz, 1281 frequencies
  Band F: 832.000 to 865.000 MHz, 1282 frequencies
  Band L: 575.000 to 608.000 MHz, 1321 frequencies
  Band M: 614.000 to 647.000 MHz, 1321 frequencies
  Not all frequency bands available in all areas. Please check with local regulations.
• Minimum Frequency Step: 25 kHz
• Modulation Mode: FM stereo
• Maximum Deviation: ±40 kHz
• Dynamic Range: 90 dB (typical), A-weighted
• Total Harmonic Distortion:

• Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications.
• Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage
• Half-rack stereo transmitter in a full-metal housing with OLED display for full control
• Easy and flexible wireless synchronization between transmitter and receiver via infrared
• Compatible with Sennheiser WSM control software for flexible frequency allocation
• Up to 16 compatible channels
• Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
• Transmission Range: up to 100 meters / 300 feet
• High RF output power (up to 30 mW) depending on country regulations

• Dimensions Approx. 202 x 212 x 43 mm
• Compander Sennheiser HDX
• THD, total harmonic distortion 90 dB
• RF output power switchable: Low: typ. 10 mW, Standard: typ. 30 mW, High: typ. 50 mW
• Switching bandwidth up to 42 MHz
• Peak deviation ±48 kHz
• Nominal deviation ±24 kHz
• Modulation Wideband FM stereo (MPX pilot tone)
• Power supply 12 V DC
• Current consumption max. 350 mA
• Max. Input voltage +22 dBu
• Transmission frequency Max. 1680 frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation, 6 frequency banks with up to 16 programmable channels
• AF frequency response 25 Hz to 15 kHz
• Temperature Range -10 °C to +55 °C
• Frequency stability ±10 ppm
• Antenna Output BNC socket, 50 Ω

• Dimensions Approx. 82 x 64 x 24 mm
• Compander Sennheiser HDX
• THD, total harmonic distortion ≤ 0.9 %
• Weight (incl. batteries) approx. 125 g
• Signal-to-noise ratio approx. 90 dBA
• Switching bandwidth up to 42 MHz
• Peak deviation ±48 kHz
• Nominal deviation ±24 kHz
• Operating time approx. 4 to 6 hours (depending on volume level)
• Modulation Wideband FM
• Power supply 2 AA batteries, 1.5 V or BA 2015 accupack
• Current consumption at nominal voltage: approx. 140 mA
• with transmitter switched off: ≤ 25 µA
• Adjacent channel rejection Typically ≥ 65 dB
• Audio-Output-Power 2 x 100 mW at 32 Ω
• Intermodulation attenuation Typically ≥ 70 dB
• Limiter –18 dB to –6 dB, adjustable in steps of 6 dB, can be switched off
• Powering 3 V battery / 2.4 V rechargeable battery
• Receiving frequency Max. 1680 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation 6 frequency banks with up to 16 programmable channels
• RF sensitivity < 4 μV, typ. 1.6 μV for 52 dBA rms S/N
• Squelch 5 to 25 dBµV, adjustable in steps of 2 dB
• Bass Boost +8 dB at 80 kHz
• Temperature Range -10 °C to +55 °C
• Receiver Principle Adaptive diversity
• Blocking ≥ 80 dB

• Dimensions Approx. 82 x 64 x 24 mm
• Compander Sennheiser HDX
• THD, total harmonic distortion ≤ 0.9 %

• SR IEM G4 stereo transmitter
• 2 EK IEM G4 stereo receiver
• 2 IE 4 earphones
• 4 AA batteries
• rod antenna
• GA 3 rackmount set