LD Systems D 1057 – Dynamic Instrument Microphone

62.50 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response. Product type Microphones Type Instruments Frequency response 50 – 16500 Hz Directivity cardioid Nominal impedance 600 Ohm(s) […]

 

Read more

The D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response.

Product type

Microphones


Type

Instruments


Frequency response

50 – 16500 Hz


Directivity

cardioid


Nominal impedance

600 Ohm(s)


Max. SPL (1% THD @ 1kHz)

142 dB


Microphone input

XLR (3-pin)


Length

155 mm


Diameter

31 mm


Accessories (included)

XLR cables


Weight

0,725 kg


Weight 0.72 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems D 1057 – Dynamic Instrument Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems D 1057 - Dynamic Instrument Microphone removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeAKG C 451B B/ST Matched Pair removeShure DMK57-52 - Drum Mic Kit removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) remove
NameLD Systems D 1057 - Dynamic Instrument Microphone removeELECTRO VOICE PL33 Kick-Drum Microphone, Dynamic, Supercardioid removeAKG C 451B B/ST Matched Pair removeShure DMK57-52 - Drum Mic Kit removeSHURE Beta-56a - Snare-Tom Microphone 50Hz to 16kHz removeBEYERDYNAMIC M 88 TG Dynamic Microphone (Hypercardioid) remove
Imagebeyerdynamaic m 88 tg dynamic hyperdioid microphone
SKUD1057001808C 451B STEREO PAIRDMK57-52BETA 56AM-88 TG
Rating
Price 62.50 incl. GR VAT 110.00 incl. GR VAT 917.03 incl. GR VAT 627.00 incl. GR VAT 196.80 incl. GR VAT 419.99 incl. GR VAT
Stock

Only 1 left in stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock (can be backordered)

AvailabilityOnly 1 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Legendary, universal all purpose microphone classic
  • Perfectly suitable for stage and studio
  • Unbelievably rich sound
  • Made in germany
ContentThe D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response. Product type Microphones
Type Instruments
Frequency response 50 - 16500 Hz
Directivity cardioid
Nominal impedance 600 Ohm(s)
Max. SPL (1% THD @ 1kHz) 142 dB
Microphone input XLR (3-pin)
Length 155 mm
Diameter 31 mm
Accessories (included) XLR cables
Weight 0,725 kg

Audio Frequency Response    20 Hz - 10,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Dynamic
Finish    Textured Satin Black
Impedance, Low-Z balanced    150 Ω
Mic Type    Instrumental
Open Circuit Voltage    0.63 mV/Pascal
Polar Pattern    Supercardioid
Power Requirement    Passive
Shipping Weight    23.7 oz (672 g)
Wired/Wireless    Wired
Weight Net    12.84 oz (364 g)

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

  • Identical acoustics of the legendary CK 1.
  • Rugged construction.
  • Ruler-flat on-axis frequency response.
  • Precise, nearly frequency independent cardioid.
  • Extremely accurate signal transfer.
  • Transformerless output stage for minimum distortion at low frequencies.
  • Protected against electrostatic and magnetic interference.
  • Selectable 10-dB and 20-dB preattenuation pads.
  • Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
  • Operates on phantom power to DIN/IEC between 12 V and 48 V.
  • Complete with SA 40 stand adapter and W 90 windscreen.
  • Each microphone comes with its own individual frequency response plot.

Specifications:

  • Polar pattern: Cardioid
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 9 mV/Pa (-41 dBV)
  • Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
  • Equivalent noise level (CCIR 468-3): 29 dB
  • Equivalent noise level: 18 dB-A
  • Signal/noise ratio (A-weighted): 76 dB
  • Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
  • Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
  • Impedance: 1000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN 45596
  • Current consumption:

The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.

  • Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.

  • A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments.
  •  

    NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.

    Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.

    Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

    • Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
    • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
    • Compact design reduces stage clutters
    • Hardened steel mesh grille resists wear and abuse
    • Neodymium magnet for high signal-to-noise ratio output
    • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
    • Frequency response: 50 to 16,000 Hz

    Technical Data

    Transducer Type: Dynamic
    Polar Pattern: Hypercardioid
    Microphone Frequency Response: 30 - 20.000 Hz
    Connection Type: XLR 3-pin

    Made in Germany

    Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.

     
    Perfect for heavy bass Sources
    The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!  
    Flexible tool iN The studio

    The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.

    Weight0.72 kg0.35 kg2.00 kg2.00 kg0.80 kg0.600 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.72 kg
    Weight 0.35 kg
    Weight 2.00 kg
    Weight 2.00 kg
    Weight 0.80 kg
    Weight 0.600 kg