LD Systems D 1057 – Dynamic Instrument Microphone

62.50 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response. Product type Microphones Type Instruments Frequency response 50 – 16500 Hz Directivity cardioid Nominal impedance 600 Ohm(s) […]

 

Read more

The D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response.

Product type

Microphones


Type

Instruments


Frequency response

50 – 16500 Hz


Directivity

cardioid


Nominal impedance

600 Ohm(s)


Max. SPL (1% THD @ 1kHz)

142 dB


Microphone input

XLR (3-pin)


Length

155 mm


Diameter

31 mm


Accessories (included)

XLR cables


Weight

0,725 kg


Weight 0.72 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems D 1057 – Dynamic Instrument Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems D 1057 - Dynamic Instrument Microphone removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-602 II Dynamic Microphone for Strings, Kick Drum removeAKG C 414-XLII/ST Matched Pair removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE Beta98HC - clip on condenser instrument mic remove
NameLD Systems D 1057 - Dynamic Instrument Microphone removeDAP AUDIO D1301 PL-07 Instrument Dynamic Microphone removeSENNHEISER E-602 II Dynamic Microphone for Strings, Kick Drum removeAKG C 414-XLII/ST Matched Pair removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE Beta98HC - clip on condenser instrument mic remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUD1057D1301H10SE00118C 414-XLII STBETA57ABETA98H/C
Rating
Price 62.50 incl. GR VAT 43.39 incl. GR VAT 148.00 incl. GR VAT 2,100.00 incl. GR VAT 175.00 incl. GR VAT 241.91 incl. GR VAT
Stock

Only 1 left in stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 1 left in stockIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe D1057 completes a series of dynamic cardioid instrument microphones designed for professional sound reinforcement and project studio recording. These microphones incorporate high-quality neodymium magnets and dual membrane dome diaphragms for high sensitivity and great extended frequency response. Product type Microphones
Type Instruments
Frequency response 50 - 16500 Hz
Directivity cardioid
Nominal impedance 600 Ohm(s)
Max. SPL (1% THD @ 1kHz) 142 dB
Microphone input XLR (3-pin)
Length 155 mm
Diameter 31 mm
Accessories (included) XLR cables
Weight 0,725 kg
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps. Technical Info Type: Dynamic, Moving coil. Freq.Resp.: 40 to 16.500 Hz. Polar Pattern: Cardioid Sensitivity (1000Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max SPL: 137dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR male-type). Net. Weight: 245 g Dimensions: (Ø 32 mm x L 157 mm) Accessories: 6 mtr balanced cable with XLR plugs

The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.


Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g

Complete With Stereo Bar, Windshield's and Cradle'

The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.

The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.

Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.

The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.

The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.

Features:

  • High sensitivity and extremely low self noise
  • Five switchable polar patterns for placement and application flexibility
  • Two-color LEDs provide quick visual indication of selected polar pattern and output overload
  • Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
  • Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
  • High sound pressure level capability, 140 - 158dB, and wide dynamic range
  • Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
  • Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
  • All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions

Specifications:

  • Type: 1" large diaphragm pressure gradient microphone
  • Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
  • Frequency Range: 20 to 20,000 Hz
  • Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
  • Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
  • Preattenuation Pad: -6, -12,-18 dB, switchable
  • Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: = 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Current consumption: Approximately 4.5 mA
  • Dynamic range: 134 dB minimum
  • Environment Temperature range: -10° C to +60° C (14° F to 140° F)
  • Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight 300 g (10.6 oz.)

 

Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

  • Mew A98D flexible drum mount
  • SPL handling to 160dB
  • frequency response of 20 to 20,000Hz and included preamplifier
  • shock mount and windscreen
Weight0.72 kg0.24 kg0.55 kg2.00 kg0.50 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.72 kg
Weight 0.24 kg
Weight 0.55 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 0.20 kg