| Content |
LD Systems PRO Series - 8" active PA Speaker
The LD Systems LDP82A is an active bass reflex multifunctional loudspeaker equipped with an 8" speaker and a 1" compression driver.
This loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 600 W Peak and a sound pressure level of 112 dB (max.). This light loudspeaker impresses with assertive treble and midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Specifications 8" Multifunctional Loudspeaker Active: - Model Name: LDP82A
- Type: Bass Reflex
- Components:
- Woofer: 8" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 90° x 40°
- Power (RMS): 150 W
- Power (Peak): 600 W
- Frequency Range: 80 Hz - 15 kHz
- SPL (1 W / 1 m): 92 dB
- Max SPL: 112 dB
- Protection: Over-current
- Controls: Volume, Gain, Mic. Gain, High, Low, On/Off Switch, Ground Lift
- Indicators: Power, Clip
- Connectors:
- Input: Mic: XLR + Jack 6,3 mm Line: XLR + RCA Phono
- Output: Line: XLR + Jack 6,3 mm
- Power Supply: Transformer
- Cabinet Material: PP
- Dimensions (W x H x D): 295 x 420 x 235 mm
- Additional features: M8 rigging points, Stand support (36 mm)
User's manual [2,48 MB] | The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: white
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
| Code: |
37689 / 37906 White |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
200/50 W RMS |
| Built-in amplifier peak LF/HF: |
400/100 W |
| Frequency response: |
60Hz - 20KHz -6dB |
| Low Frequency woofer: |
8 - 1.7 coil inch |
| High Frequency driver: |
1 -1 coil inch |
| Maximum SPL cont/peak: |
120/124 dB |
| Dispersion: |
90° x 60° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
2.5 KHz |
| AC Power requirements: |
160 VA |
| Input connector: |
XLR - jack with loop |
| Power cord: |
5 / 16.4 m/ft |
| Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
| Net Weight: |
8.2 / 18.7 Kg/lb |
| Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
| Transport Weight: |
9.7 / 21.38 Kg/lb |
| User´s Manual
Technical drawing
LD Systems STINGER 28 A G3
Active 2 x 8" 2-way bass-reflex PA speaker
- Active 2 x 8" 2-way bass-reflex PA speaker
- 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- Two 8" custom woofers and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimum speaker protection
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion.
LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain , 2 x Mic/Line , Mode
Indicators
Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs
2
Line input connectors
6.3 mm jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg | Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
| Model |
CP8 |
| Configuration |
Two-way active loudspeaker |
| LF Transducer: |
8 in (203 mm), cone |
| HF Transducer: |
1.4 in (35.6 mm) compression driver |
| Frequency Response (-6 dB) |
56 - 20 kHz |
| Frequency Range (-10 dB) |
53 - 20 kHz |
| Nominal Coverage Angle: |
90° Axisymetric |
| Maximum Rated SPL1: |
124 dB |
| Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
| Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
| Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
| Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
| AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
| AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
| Enclosure Material: |
Polypropylene |
| Attachment Points: |
M8 threaded insert |
| Color: |
Black (RAL 9011) |
| Grille: |
18 Gauge powder-coated steel |
| Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
| Net Weight: |
21.0 lbs (9.5 kg) |
| Shipping Weight: |
25.5 lbs (11.4 kg) |
| Regulatory: |
EMC, UL, CB |
| Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
|
Reviews
There are no reviews yet.