Content |
LD Systems PRO Series - 8" active PA Speaker
The LD Systems LDP82A is an active bass reflex multifunctional loudspeaker equipped with an 8" speaker and a 1" compression driver.
This loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 600 W Peak and a sound pressure level of 112 dB (max.). This light loudspeaker impresses with assertive treble and midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Specifications 8" Multifunctional Loudspeaker Active: - Model Name: LDP82A
- Type: Bass Reflex
- Components:
- Woofer: 8" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 90° x 40°
- Power (RMS): 150 W
- Power (Peak): 600 W
- Frequency Range: 80 Hz - 15 kHz
- SPL (1 W / 1 m): 92 dB
- Max SPL: 112 dB
- Protection: Over-current
- Controls: Volume, Gain, Mic. Gain, High, Low, On/Off Switch, Ground Lift
- Indicators: Power, Clip
- Connectors:
- Input: Mic: XLR + Jack 6,3 mm Line: XLR + RCA Phono
- Output: Line: XLR + Jack 6,3 mm
- Power Supply: Transformer
- Cabinet Material: PP
- Dimensions (W x H x D): 295 x 420 x 235 mm
- Additional features: M8 rigging points, Stand support (36 mm)
User's manual [2,48 MB] |
Features
- 2-way, full-range system
– 8″ bass loudspeaker
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points
– Stand mountable
The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.
Technical Data
RMS Power Handling | 150 W | Peak Power Handling | 600 W | Frequency Range (-10 dB) | 60 Hz-20 kHz | Nominal Impedance | 8 ohms | On-axis Sensitivity 1 W / 1 m | 92 dB SPL | Rated Peak SPL at 1 m | 120 dB | Dispersion | 80º x 80º | Enclosure Material | Birch Plywood | Color/Finish | Black/ISO-Flex Paint | Connectors | 2 x NL4 Speakon | Dimensions (H x W x D) | 47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in | Weight | 8.4 kg (18.5 lb) |
|
- 2-way bi-amplified, bass-reflex design
- 200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
- Frequency response from 65Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- optional wall bracket mount thread, 35mm (1 3/8”) top-hat
- one integrated pocket handle
Code: |
41212 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
700/200 W RMS |
Built-in amplifier peak LF/HF: |
1400/400 W |
Frequency response: |
65Hz-20kHz -6dB |
Low Frequency woofer: |
8 - 2 coil inch |
High Frequency driver: |
1 - 1.4 coil inch |
Maximum SPL cont/peak: |
123/131 dB |
Dispersion: |
80°x50° rotatable HxV |
Input impedance: |
22 Kohm |
AC Power requirements: |
640 VA |
Input connector: |
XLR with loop, RCA ST |
Power cord: |
5/16.4 m/ft |
Net Dimension (WxHxD): |
274x500x300 / 10.8x19.7x11.8 mm/inch |
Net Weight: |
15.6/34.39 Kg/lb |
Transport Dimension (WxHxD): |
395x620x375 / 15.5x24.4x14.7 mm/inch |
Transport Weight: |
15.3/33.7 Kg/lb |
|
The DVX D8 HP is a powerful active 8“/1“2-way speakercabinet designed to render speech and background and other music.
Loaded with a high-quality8" woofer and a 1" compression driverwith a rotatable CD horn, it is a very articulate with great speech intelligibility and excellent audio properties.
Equipped with an integrateddigiproG2digital power amp, this powered enclosure offers the compact dimensions and light weight that to date have been the domain of high-end passive loudspeakers.
Cabin Type: | Wood | Function: | Active, 2 way | Monitor Use: | Yes | Amplifier: | 400W | LF/MF, Woofer: | 8'' | HF, Horn: | 1 ' | DSP Processor: | Yes | Max SPL: | 125 dB | Dispersion: | 90/70 ° | Frequency Response: | 75 - 20.000 Hz | Pole mount: | - | Rigging: | 6x M8 2x 10mm Quick Release for DTF-bracket | Dimensions: | 250 x 425 x 260 (W x H x D) | Weight: | 9.7 kg | Color: | Black |
| User´s Manual
Technical drawing
LD Systems STINGER 28 A G3
Active 2 x 8" 2-way bass-reflex PA speaker
- Active 2 x 8" 2-way bass-reflex PA speaker
- 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- Two 8" custom woofers and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimum speaker protection
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion.
LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain , 2 x Mic/Line , Mode
Indicators
Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs
2
Line input connectors
6.3 mm jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg |
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
Model |
K8.2 |
Configuration |
Multi-purpose, 2-way active loudspeaker |
LF Transducer |
8-inch (203 mm), cone |
HF Transducer |
1.4-inch (35.6 mm) titanium diaphragm compression driver |
Frequency Response (-6 dB) |
59 Hz - 20 kHz |
Frequency Range (-10 dB) |
55 Hz - 20 kHz |
Nominal Coverage Angle |
105° Axisymetric |
Maximum Rated SPL1 Amplifier Cooling |
128 dB @1 M, peak 122 dB @ 1 M, continuous Class D Peak: 1800 W (LF), 225 W (HF) Low-noise, variable speed fan |
Controls |
Power 3 x Level Rotary encoder (push) 2 x selection buttons |
Indicators |
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED |
Connectors |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector |
AC Power Input |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption 1/8th Power2 |
100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A |
AC Power Consumption - Standby |
.2A at any voltage |
Enclosure Details |
|
Enclosure |
Impact Resistant ABS |
Attachment Points |
2 x M10 threaded inserts plus Pull-Back |
Color |
Black (RAL 9011) |
Grille |
18 Gauge powered coated steel, internal cloth lining |
Dimensions (HxWxD) |
17.7 x 11 x 10.6 in 449 x 280 x 269 mm |
Net Weight |
12.2 kg (27 lbs) |
Shipping Weight |
14.4 kg (31.8 lbs) |
Regulatory |
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B |
Optional Accessories |
K8 Tote, K8 Outdoor Cover M10 Kit-C, K.2-LOC Lock Out Cover K8.2 Yoke |
|
Reviews
There are no reviews yet.