| Content | The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
10" Passive Loudspeaker
- 1200 W (Peak), 127 dB peak SPL system that is reliability verified with over 500 hours of abuse testing and endurance testing to 4x typical industry practices.
- 1.4 inch DH-1C (1 inch exit) titanium compression driver for extended transparent high-frequency response.
- High-output EVS-10M woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.
The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.
Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The full-range models feature a low profile form factor designed with a high-spec composite enclosure to balance weight, manageability, as well as structural integrity. The proprietary features that have made the other members of the EV portable speaker family a goto for best-in-class performance are also present: Signal Synchronized Transducers (SST) waveguide concept.
EV\'s industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness. |
The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.
| Features |
|---|
| 90° x 70° CMD (Constant Matching Design) constant directivity horn | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | | LICC (Low Impedance Compensated Crossover) network | | 4 Suspension points (M10) | | 35 mm standard internal pole mount |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 59 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 70 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 127 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 70° | | | Directivity index; Q: | 9.4 | | | System Sensitivity: | 96 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 300 Watt | | | Peak Power Handling: | 1200 Watt | | | Recommended Amplifier: | 600 | | | Protections: | Dynamic | | | Crossover frequencies: | 1800 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1" HF driver, 1.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 109 dB | | | Woofer: | 10" woofer, 2" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 250 Watts AES | | | Sensitivity: | 96 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | | Handles: | 1on back | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 500 / 19.68 mm/inch | | | Width: | 300 / 11.81 mm/inch | | | Depth: | 287 / 11.30 mm/inch | | | Net Weight: | 13 / 28.66 Kg/Lbs |
|
- 38 Hz to 17 kHz frequency range
(-10 dB) - 250W pink noise, 500 watts continuous program power capacity
- 120 x 110 degree coverage horn
- 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
- 4 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 30-WH)
- Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
- Net Weight: 18.9 kg (42 lb)
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
Comprising four versatile loudspeaker enclosures for either portable use or fixed installation, FBT is debuting the VENTIS range at Pro Light + Sound 2016. Available in either passive or bi-amplified versions, each of the models – the VENTIS 115, 112, 110, and 206 – has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112 and 110 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The three enclosures are as suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
- 2-way, bass reflex design
- Digital Signal Processor with graphic display
- 15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- ORIGINAL / LIVE The renowned, smooth FBT sound
- VOCAL A special EQ setting to maximise speech intelligibility
- DJ Designed to keep the energy high and your audience dancing
- TOURING The reliability and the roar of the industry’s most popular touring systems
- LOUDNESS The ultimate preset for listening at a medium or low volume
- WARM A special setting to emphasise full-bodied, low-mid frequencies.
| Code: |
40682 |
| Configuration: |
2 way |
| Recommended amplifier: |
300 W RMS |
| Long Term power: |
150 W |
| Short term power: |
600 W |
| Nominal impedance: |
8 ohm |
| Frequency response: |
60Hz - 18KHz -6dB |
| Low Frequency woofer: |
10 - 2 coil inch |
| High frequency driver: |
1 - 1.4 coil inch |
| Sensitivity (@1W/1m): |
97 dB |
| Maximum SPL cont/peak: |
122/127 dB |
| Dispersion: |
80° x 50° rotatable HxV |
| Crossover Frequency: |
1.8 KHz |
| Recommended HP filter: |
HP 50Hz - 12-24dB/oct |
| Input connector: |
2 x SPEAKON |
| Net Dimension (WxHxD): |
329x575x325 / 12.95x22.63x12.79 mm/inch |
| Net Weight: |
15.1/33.28 kg/lb |
| Transport Dimension (WxHxD): |
420x675x400 / 16.53x26.57x15.74 mm/inch |
| Transport Weight: |
17.6/38.80 kg/lb |
|
Reviews
There are no reviews yet.