| Content |
User's manual
LD Systems Catalogue
The LD Systems LDPN 122A2 is an active bass reflex multifunctional loudspeaker equipped with a 12" FE speaker and a 1" compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1000 W Peak and a sound pressure level of 122 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: a microphone input (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Product type
PA loudspeaker
Type
Actives
Low/mid driver dimensions
12 "
Woofer Size
304 mm
Low/mid driver magnet
Ferrite
Low/mid driver brand
Custom-made
Low/mid driver voice coil
120 "
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class A/B (Bi-amp)
Dispersion (H x V)
90 x 40 °
RMS
250 W
Peak power
1000 W
Frequency response
60 - 18.000 Hz
Integrated media player
no
Protection circuits
overload
Controls
Bass , Bass boost , ground lift , Line Gain , mains switch (on/off) , Mic Gain , Treble , volume
Indicators
clip , Power , signal
Line inputs
2
Line input connectors
2 x RCA , XLR
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
6.3 mm Jack , XLR
Operating voltage
transformer
Operating voltage
230 V AC / 50-60 Hz
Cabinet material
polypropylene
Cabinet construction
vented
Width
430 mm
Height
580 mm
Depth
315 mm
Weight
18,05 kg
Features
Speaker Pole Mount (36 mm)
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 50Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 131dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Floor Wedge, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 26“
Width 15“
Depth 15.4“
Weight 49 lbs.
Manufacturer Part Number KW122
|
A versatile 12" powered speaker made from heavy duty polypropylene housing with a high power 12" woofer and 1.35" compression driver. Suitable for mobile DJ's, hire companies, installations, aerobics classes and as a monitor for solo singers and bands. A robust, well designed cabinet with a good punch and crystal clear high frequency response. Simple controls have been used on the rear, balanced mic input on XLR OR JACK, a balanced line input on XLR or unbalanced on RCA & a link output to similar or active subwoofers. A strong lifting handle to help mount onto a 35mm speaker pole and the option of a padded bag for extra protection that can be purchased separately.
SPECIFICATION
Power: 200 Watts RMS
Response: 45-20000Hz
Dimensions: 588 x 431 x 310mm
Weight: 17Kg
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 12" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 17.2/37.91 kg/lbs
|
- 2000W power via ultra-efficient Class-D amplification
- TruSourceTM Technology
- Mackie designed, vertically-aligned, common-magnet TruSource driver
- 12″ LF woofer / 1.75″ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly-versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (31 lbs. / 14.1 kg)
|
Reviews
There are no reviews yet.