JB Systems PSA 15 active speaker 2way 299W Rms

378.99 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
GENERAL   The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which […]

 

Read more

GENERAL

 

The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.

 

JB Systems PSA-15 Speaker: Polypropylene

 

The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.

CONNECTIONS

 

The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included.

Weight 23.30 kg

Reviews

There are no reviews yet.

Be the first to review “JB Systems PSA 15 active speaker 2way 299W Rms”

Your email address will not be published. Required fields are marked *

Quick Comparison

JB Systems PSA 15 active speaker 2way 299W Rms removeBEHRINGER B115W EUROLIVE Active 2-Way 15" PA Speaker System with Bluetooth Wireless Technology, Wireless Microphone Option and Integrated Mixer removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeBEHRINGER B115MP3 EUROLIVE Active 1000-Watt 2-Way 15" PA Speaker removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeQSC KW152 2 WAY ACTIVE LOUDSPEAKER 15'' 1000 W Class D remove
NameJB Systems PSA 15 active speaker 2way 299W Rms removeBEHRINGER B115W EUROLIVE Active 2-Way 15" PA Speaker System with Bluetooth Wireless Technology, Wireless Microphone Option and Integrated Mixer removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeBEHRINGER B115MP3 EUROLIVE Active 1000-Watt 2-Way 15" PA Speaker removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeQSC KW152 2 WAY ACTIVE LOUDSPEAKER 15'' 1000 W Class D remove
Image
SKU151996E006391VP 7315-DP64PE005227E006032010117
Rating
Price378.99 incl. GR VAT 397.00 incl. GR VAT 8,325.00 incl. GR VAT 397.00 incl. GR VAT 1,599.00 incl. GR VAT 1,799.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

GENERAL

 

The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.

 

JB Systems PSA-15 Speaker: Polypropylene

 

The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.

CONNECTIONS

 

The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included.

 

Product Features:
  • High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
  • Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
  • High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
  • “Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
  • 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
  • Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
  • State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Additional Line output allows linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning:
  • - Stand mounting with 35 mm pole socket
  • - Tilts on its side for use as a floor monitor
  • Ergonomically shaped handles for easy carrying and setup
  • High-quality components and exceptionally rugged construction ensure long life

 

 

  User's Manual

JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System

Key Features :
 
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet? compatible; network control.

15-inch Differential Drive? low-frequency driver for
extended low-frequency output.

60° x 40°coverage.

Stylized and ergonomically designed powder-coated
die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).

Optional DPCN (CobraNet?) digital audio input
module available.
 
Specifications:

Frequency Range

:

34 Hz to 20 kHz (-10 dB)

Frequency Response

:

43 Hz to 18 kHz ( ± 3 dB)

Coverage Pattern

:

60°x 40° rotatable waveguide

Directivity Factor (Q)

:

15.85

Directivity Index (DI)

:

12 dB

Maximum Peak Output1

:

138 dB SPL 1m

Transducer Section

   

Low Frequency Section

:

JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled

Bandpass
Nominal Impedance

:

4 ohms

Mid/High
Frequency Section

:

 

Mid Frequency

:

JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer

High Frequency

:

JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit

Waveguide

:

JBL PT-K64-MHF

Bandpass
Nominal Impedance

:

8 ohms

System

 

DP2 Internal
Amplification Output
(at nominal load)

:

2200 Watts Peak,
1100 Watts Continuous

DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance)

:

750LF/350HF Watts

DP2 Output Section

:

2-Channel, Class I

Audio Input connector:

:

XLR with loop-through

Network
Control Connector

:

Ethernet, RJ45

Signal Processing

:

DSP Based, resident in
Input Module

System Management

:

DSP based limiters for mechanical
and thermal protection

AC Power
Operating Range

:

Auto Select 90-132VAC/
216-264VAC, 50/60Hz

AC Line Voltage

:

50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%)

AC Input Connector

:

Neutrik PowerCon

AC Loop-Thru

:

Neutrik PowerCon

AC Current Requirement

:

6A per system at 120V, 3A per
system at 240V

Enclosure

 

Box Construction

:

5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.

Suspension System

:

6 standard air-cargo 3 in. track
and 12 M10 fittings

Grille

:

14 Gauge Black powder-coated
perforated steel with foam backing

Dimensions
(H x W x D)

:

914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in)

Net Weight

:

44 kg (97 lb)

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
High-performance MP3 player included to play audio files via USB stick
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 

 User's Manual

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.


  • 15-inch LF SMX woofer
  • 1.25-inch HF titanium compression driver
  • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
  • 135 dB peak SPL
Frequency Range 40 Hz - 20 kHz
Maximum SPL 135 dB peak dB
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A
Power Rating 2000 W
Frequency Response 48 Hz - 20 kHz
Coverage (Nominal -6 dB) H 90 °
Coverage (Nominal -6 dB) V 60 °
LF Transducer SMX2150 380 mm (15 in)
HF Transducer DH3-B 1.25-in titanium compression driver
Crossover Frequency 1500 Hz
Connector Type (2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material 18-mm, 13-ply birch plywood with EVCoat
Grill 16AWG steel with powdercoat
Suspension (8) M10 suspension points
Height 691 mm (27.2“)
Width 431 mm (16.97“)
Depth 447 mm (17.6“)
Weight Net 27.7 kg (61.07 lbs)
Shipping Weight 31.5 kg (69.45 lbs)

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     15“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     44Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     133dB
Horizontal Coverage Angle     60 Degrees Axisymmetric
Vertical Coverage Angle     60 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     32.1“
Width     17.5“
Depth     15.2“
Weight     64 lbs.
Manufacturer Part Number     KW152

Weight23.30 kg17.70 kg44.00 kg17.70 kg31.50 kg28.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 23.30 kg
Weight 17.70 kg
Weight 44.00 kg
Weight 17.70 kg
Weight 31.50 kg
Weight 28.00 kg