LD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms

Discontinued

310.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Soundcheck 01/05 15″ active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15″ FE speaker and a 1″ compression driver. This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an […]

 

Read more

pdfUser’s manual
pdfSoundcheck 01/05

15″ active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15″ FE speaker and a 1″ compression driver.

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1200 W (Peak) and a sound pressure level of 124 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: 2 microphone inputs (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.

Product type PA loudspeaker


Type Actives


Low/mid driver dimensions 15 ”


Woofer size 381 mm


Low/mid driver magnet Ferrite


Low/mid driver brand Custom-made


Tweeter dimensions 1 ”


Tweeter dimensions (mm) 25 mm


Tweeter magnet Ferrite


Tweeter brand Custom-made


Amplifier Class A/B (Bi-amp)


Dispersion (H x V) 90 x 40 °


RMS 300 W


Peak power 1200 W


Frequency response 55 – 18.000 Hz


Max. SPL 119.5 dB


Integrated media player no


Protection circuits overload


Controls Bass , Bass boost , ground lift , mains switch (on/off) , Mic Gain 1 , Mic Gain 2 , Treble , volume


Indicators clip , Power , Signal


Line inputs 2


Line input connectors 2 x RCA , XLR


Mic inputs 2


Mic inputs 6.3 mm jack , XLR


Line outputs 2


Line output connectors 6.3 mm jack , XLR


Operating voltage transformer


Operating voltage 230 V AC / 50-60 Hz


Cabinet material polypropylene


Cabinet construction vented


Width 450 mm


Height 685 mm


Depth 380 mm


Weight 22,75 kg


Features Speaker Pole Mount (36 mm)


Weight 23.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms removeDYNACORD A115A 2WAY 15'' ACTIVE LOUDSPEAKER 500W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeBEHRINGER B115D EUROLIVE Active 1000-Watt 2-Way 15" PA Speaker System with Wireless Option and Integrated Mixer removeBEHRINGER B115W EUROLIVE Active 2-Way 15" PA Speaker System with Bluetooth Wireless Technology, Wireless Microphone Option and Integrated Mixer remove
NameLD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms removeDYNACORD A115A 2WAY 15'' ACTIVE LOUDSPEAKER 500W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeBEHRINGER B115D EUROLIVE Active 1000-Watt 2-Way 15" PA Speaker System with Wireless Option and Integrated Mixer removeBEHRINGER B115W EUROLIVE Active 2-Way 15" PA Speaker System with Bluetooth Wireless Technology, Wireless Microphone Option and Integrated Mixer remove
Image
SKULDPN152A2E009289VP 7315-DP64PE006032E005226E006391
Rating
Price 310.00 incl. GR VAT 943.00 incl. GR VAT 8,325.00 incl. GR VAT 1,599.00 incl. GR VAT 358.36 incl. GR VAT 397.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

pdfUser's manual
pdfSoundcheck 01/05

15" active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15" FE speaker and a 1" compression driver.

This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1200 W (Peak) and a sound pressure level of 124 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: 2 microphone inputs (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.

Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.


Product type PA loudspeaker
Type Actives
Low/mid driver dimensions 15 "
Woofer size 381 mm
Low/mid driver magnet Ferrite
Low/mid driver brand Custom-made
Tweeter dimensions 1 "
Tweeter dimensions (mm) 25 mm
Tweeter magnet Ferrite
Tweeter brand Custom-made
Amplifier Class A/B (Bi-amp)
Dispersion (H x V) 90 x 40 °
RMS 300 W
Peak power 1200 W
Frequency response 55 - 18.000 Hz
Max. SPL 119.5 dB
Integrated media player no
Protection circuits overload
Controls Bass , Bass boost , ground lift , mains switch (on/off) , Mic Gain 1 , Mic Gain 2 , Treble , volume
Indicators clip , Power , Signal
Line inputs 2
Line input connectors 2 x RCA , XLR
Mic inputs 2
Mic inputs 6.3 mm jack , XLR
Line outputs 2
Line output connectors 6.3 mm jack , XLR
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Cabinet material polypropylene
Cabinet construction vented
Width 450 mm
Height 685 mm
Depth 380 mm
Weight 22,75 kg
Features Speaker Pole Mount (36 mm)

Features:

    DH-1K 1.5-inch Titanium Diaphragm Compression Driver
    EVS-15K 15-inch Woofer
    124 dB max. SPL
    500 W Class-D Amplifier
    Integrated DSP with FIR filter


Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046

JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System

Key Features :
 
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet? compatible; network control.

15-inch Differential Drive? low-frequency driver for
extended low-frequency output.

60° x 40°coverage.

Stylized and ergonomically designed powder-coated
die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).

Optional DPCN (CobraNet?) digital audio input
module available.
 
Specifications:

Frequency Range

:

34 Hz to 20 kHz (-10 dB)

Frequency Response

:

43 Hz to 18 kHz ( ± 3 dB)

Coverage Pattern

:

60°x 40° rotatable waveguide

Directivity Factor (Q)

:

15.85

Directivity Index (DI)

:

12 dB

Maximum Peak Output1

:

138 dB SPL 1m

Transducer Section

   

Low Frequency Section

:

JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled

Bandpass
Nominal Impedance

:

4 ohms

Mid/High
Frequency Section

:

 

Mid Frequency

:

JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer

High Frequency

:

JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit

Waveguide

:

JBL PT-K64-MHF

Bandpass
Nominal Impedance

:

8 ohms

System

 

DP2 Internal
Amplification Output
(at nominal load)

:

2200 Watts Peak,
1100 Watts Continuous

DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance)

:

750LF/350HF Watts

DP2 Output Section

:

2-Channel, Class I

Audio Input connector:

:

XLR with loop-through

Network
Control Connector

:

Ethernet, RJ45

Signal Processing

:

DSP Based, resident in
Input Module

System Management

:

DSP based limiters for mechanical
and thermal protection

AC Power
Operating Range

:

Auto Select 90-132VAC/
216-264VAC, 50/60Hz

AC Line Voltage

:

50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%)

AC Input Connector

:

Neutrik PowerCon

AC Loop-Thru

:

Neutrik PowerCon

AC Current Requirement

:

6A per system at 120V, 3A per
system at 240V

Enclosure

 

Box Construction

:

5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.

Suspension System

:

6 standard air-cargo 3 in. track
and 12 M10 fittings

Grille

:

14 Gauge Black powder-coated
perforated steel with foam backing

Dimensions
(H x W x D)

:

914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in)

Net Weight

:

44 kg (97 lb)

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.


  • 15-inch LF SMX woofer
  • 1.25-inch HF titanium compression driver
  • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
  • 135 dB peak SPL
Frequency Range 40 Hz - 20 kHz
Maximum SPL 135 dB peak dB
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A
Power Rating 2000 W
Frequency Response 48 Hz - 20 kHz
Coverage (Nominal -6 dB) H 90 °
Coverage (Nominal -6 dB) V 60 °
LF Transducer SMX2150 380 mm (15 in)
HF Transducer DH3-B 1.25-in titanium compression driver
Crossover Frequency 1500 Hz
Connector Type (2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material 18-mm, 13-ply birch plywood with EVCoat
Grill 16AWG steel with powdercoat
Suspension (8) M10 suspension points
Height 691 mm (27.2“)
Width 431 mm (16.97“)
Depth 447 mm (17.6“)
Weight Net 27.7 kg (61.07 lbs)
Shipping Weight 31.5 kg (69.45 lbs)

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 

 User's Manual

 

Product Features:
  • High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
  • Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
  • High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
  • “Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
  • 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
  • Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
  • State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Additional Line output allows linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning:
  • - Stand mounting with 35 mm pole socket
  • - Tilts on its side for use as a floor monitor
  • Ergonomically shaped handles for easy carrying and setup
  • High-quality components and exceptionally rugged construction ensure long life

 

 

  User's Manual

Weight23.00 kg25.00 kg44.00 kg31.50 kg12.00 kg17.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 23.00 kg
Weight 25.00 kg
Weight 44.00 kg
Weight 31.50 kg
Weight 12.00 kg
Weight 17.70 kg