Soundcheck 01/05 15″ active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15″ FE speaker and a 1″ compression driver. This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an […]
15″ active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15″ FE speaker and a 1″ compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1200 W (Peak) and a sound pressure level of 124 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: 2 microphone inputs (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Product type PA loudspeaker
Type Actives
Low/mid driver dimensions 15 ”
Woofer size 381 mm
Low/mid driver magnet Ferrite
Low/mid driver brand Custom-made
Tweeter dimensions 1 ”
Tweeter dimensions (mm) 25 mm
Tweeter magnet Ferrite
Tweeter brand Custom-made
Amplifier Class A/B (Bi-amp)
Dispersion (H x V) 90 x 40 °
RMS 300 W
Peak power 1200 W
Frequency response 55 – 18.000 Hz
Max. SPL 119.5 dB
Integrated media player no
Protection circuits overload
Controls Bass , Bass boost , ground lift , mains switch (on/off) , Mic Gain 1 , Mic Gain 2 , Treble , volume
Indicators clip , Power , Signal
Line inputs 2
Line input connectors 2 x RCA , XLR
Mic inputs 2
Mic inputs 6.3 mm jack , XLR
Line outputs 2
Line output connectors 6.3 mm jack , XLR
Operating voltage transformer
Operating voltage 230 V AC / 50-60 Hz
Cabinet material polypropylene
Cabinet construction vented
Width 450 mm
Height 685 mm
Depth 380 mm
Weight 22,75 kg
Features Speaker Pole Mount (36 mm)
Weight
23.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD SYSTEMS LDPN152A2 1200 WATT peak Active Speaker 300W rms” Cancel reply
15" active PA Speaker The LD Systems LDPN152A2 is an active bass reflex multifunctional loudspeaker equipped with a 15" FE speaker and a 1" compression driver.
This powerful loudspeaker was designed for live applications, both as a full-range solution as well as in combination with a subwoofer. The bi-amp amplifier section delivers an output of 1200 W (Peak) and a sound pressure level of 124 dB (max.). This light loudspeaker impresses with rich bass response as well as an assertive midrange. The rear panel offers numerous connections and controls: 2 microphone inputs (XLR/jack), a line-in connector (RCA/XLR), a line-out connector (XLR/jack), 2-band EQ, a bass boost switch and a ground lift switch.
Additional highlights are the integral protective circuitry, built-in handles and rigging points, the 36 mm stand mount and the rugged overall design. Optional wall-mount brackets and monitor supports are available. The perfect PA solution for bands, mobile discos or permanent installation in medium-sized clubs and other function rooms.
Product type PA loudspeaker Type Actives Low/mid driver dimensions 15 " Woofer size 381 mm Low/mid driver magnet Ferrite Low/mid driver brand Custom-made Tweeter dimensions 1 " Tweeter dimensions (mm) 25 mm Tweeter magnet Ferrite Tweeter brand Custom-made Amplifier Class A/B (Bi-amp) Dispersion (H x V) 90 x 40 ° RMS 300 W Peak power 1200 W Frequency response 55 - 18.000 Hz Max. SPL 119.5 dB Integrated media player no Protection circuits overload Controls Bass , Bass boost , ground lift , mains switch (on/off) , Mic Gain 1 , Mic Gain 2 , Treble , volume Indicators clip , Power , Signal Line inputs 2 Line input connectors 2 x RCA , XLR Mic inputs 2 Mic inputs 6.3 mm jack , XLR Line outputs 2 Line output connectors 6.3 mm jack , XLR Operating voltage transformer Operating voltage 230 V AC / 50-60 Hz Cabinet material polypropylene Cabinet construction vented Width 450 mm Height 685 mm Depth 380 mm Weight 22,75 kg Features Speaker Pole Mount (36 mm)
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
SPECIFICATIONS
MODEL
TITAN 15 ACTIVE
GENERAL INFO
System type
Active 15" 2-way Bi-Amplified
Frequency response +/- 3db
50-20kHz
HF SECTION
Hf type
Titanium Compression Driver
Horn dispersion (H x V)
90° x 60°
Hf exit size mm / inches
25mm / 1“
PHYSICAL FEATURES
Enclosure Material
Injection Moulded Polypropylene
Enclosure Colour
Grey or White or Black
Size (mm/inches)
381mm / 15“
IN / OUT PANEL (speaker Level)
Input connector
XLR - 1/ 4" Combo jack
AMPLIFIER POWER
Power On Protection
Power switch on / off mute
Thermal Protection
Amplifier shutdown, auto reset
Low Line Voltage Shut Down
60% Nominal line voltage
Driver Protection
Independent LF and HF limiters
DC Protection
Yes
Short Protection
Yes
Controls
High (±10dB) 10kHz Shelving
Dimensions (HxWxD)
mm
708.3mm x 477.8mm x 401.77mm
inches
27.9" x 18.8" x 15.8“
Microphone / Transmitter
Maximum Input Level
+22dBu
Impedance
4 Ω
MIXER MODEL
INPUT IMPEDANCE
Balanced: 20k ohms Unbalanced: 10k ohms
Clip Limiter
Turns on approx 350W output
Limiter Indicator
Red LED
Power Indicator
Red LED
AC Power details
Power Supply
High Efficiency Switching Mode Power Supply
AC Power Options
AC100~120V / 220~240V, 50 / 60Hz
Power On Indicator
LED
Rigging / Bracket /
10 M8 threaded inserts including 4
Mounting Options
M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket
Impedance Balanced
Balanced: 1k ohm - Unbalanced: 500 ohm
Line Output
Line Output Connector
Switchable LOOP / MIX Balanced Male XLR
Input A - type
Switchable balanced mic or line level input
Input Sensitivity
Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
Maximum Input Level
+22dBu
Input Connector
XLR - 1/ 4" Combo jack
Input Impedance
Balanced: 20k ohms Unbalanced: 10k ohms
Input B - type
Line level input
Input Sensitivity
XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
Maximum Input Level
+22dBu
Input Connectors
Combo jack: 1/4" - XLR / Summed dual RCA jacks
Bass Response Optimizer
(“BRO“™) circuit
+5dB at 60Hz
Subsonic Filter
30Hz, Second-order filter
Amplifiers
Low-Frequency (Class D)
Rated 350W RMS, 700W Peak
High- Frequency (Class A/B)
Rated 70W RMS, 140W Peak
Electronic Crossover
24dB/octave Linkwitz-Riley
Crossover Frequency
1.8kHz
Controls
High (±10dB) 10kHz Shelving
Equalization
Low (±10dB) 100Hz Shelving
DIMENSIONS & WEIGHT
Net weight ( kg / lbs )
23.7kg / 52.67lbs
Gross weight ( kg / lbs )
26.94kg / 59.27lbs
Product Features:
High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
“Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35 mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
User's Manual
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
15-inch LF SMX woofer
6.5-inch MF driver
1.25-inch HF titanium compression driver
2000 W Class-D power amplifier with integrated FIR-Drive DSP
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User’s manual
Reviews
There are no reviews yet.