LD Systems GT 12 A – 12″ active PA Speaker

Discontinued

364.99 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
With its 12″ custom woofer and 1″ Celestion compression driver complement the GT 12 A active fullrange loudspeaker delivers high definition audio with a peak SPL of 122 dB, 60 Hz – 19 kHz frequency response and 90° x 60° dispersion. Covered in tough, textured Dura-Vinyl for protection and long-lasting appearance the rugged 15mm MDF […]

 

Read more

With its 12″ custom woofer and 1″ Celestion compression driver complement the GT 12 A active fullrange loudspeaker delivers high definition audio with a peak SPL of 122 dB, 60 Hz – 19 kHz frequency response and 90° x 60° dispersion.

Covered in tough, textured Dura-Vinyl for protection and long-lasting appearance the rugged 15mm MDF bass reflex enclosure integrates a 54° monitor angle, honeycomb pattern steel grille and dual tilt pole mount.

Providing outstanding value, the GT 12 A is powered by a built-in Class D digital amplifier with highly efficient SMPS technology and 1,000 watts peak output. It features XLR and 6.3 mm connectors for line and microphone input, a 2-band EQ and overcurrent and overvoltage protection for reliable operation.

A protective cover is available as accessory.

 

Product number: LDGT12A
Product type: PA loudspeaker
Type: active
Low/mid driver dimensions: 12“
Low/mid driver dimensions (mm): 304.8mm
Woofer magnet: Ferrite
Woofer brand: Custom-made
Woofer voice coil: 2.5“
Woofer voice coil (mm): 63.5mm
Horn: CD horn
HF driver dimensions: 1“
HF driver dimensions (mm): 25.4mm
HF driver magnet: Ferrite
HF driver brand: Celestion
HF driver voice coil: 1“
HF driver voice coil (mm): 25.4mm
Amplifier: Class D
Dispersion (H x V): 90 x 60°
RMS: 250W
Peak power: 1000W
Frequency response: 60 – 19000Hz
Crossover frequency: 2200Hz
Max. SPL (continuous): 119dB
Max. SPL (peak): 122dB
Protection circuits: HF Driver, over-current, over voltage
Input sensitivity: Mic: 150 mV / Line: -10dBu
Controls: Line Gain, Treble, Power, volume, Mic Gain, Bass
Indicators: signal, protect (protection circuit engaged), limit, Power
Line inputs: 1
Line input connectors: 6.3 mm Jack, XLR
Mic inputs: 1, XLR, 6.3 mm Jack
Line outputs: 1
Line output connectors: XLR
Operating voltage: Switching Power Supply, 220 V AC – 240 V AC (Auto), 50 – 60 Hz, 110 V AC – 120 V AC
Cabinet material: 15 mm MDF
Cabinet surface: Dura-vinyl textured paint
Cabinet construction: vented
Monitor angle: 54°
Width: 389mm
Height: 565mm
Depth: 368mm
Features: rugged steel grille, dual-tilt flange (0°/5°)
Weight: 20.7kg

 

Weight 21.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems GT 12 A – 12″ active PA Speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems GT 12 A - 12" active PA Speaker removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeBEHRINGER B112MP3 EUROLIVE Active 1000-Watt 2-Way 12" PA Speaker System with MP3 Player, Wireless Option and Integrated Mixer removeBEHRINGER B112D EUROLIVE Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer 1000 Watt Peak removeJBL SRX 812P ACTIVE SPEAKER 2000W, 12'', 136dB removeRCF ART 422-A Active speaker system 12" + 2", 400W remove
NameLD Systems GT 12 A - 12" active PA Speaker removeJBL VP7212/95DPC Compact Active Speaker 875 Watts removeBEHRINGER B112MP3 EUROLIVE Active 1000-Watt 2-Way 12" PA Speaker System with MP3 Player, Wireless Option and Integrated Mixer removeBEHRINGER B112D EUROLIVE Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer 1000 Watt Peak removeJBL SRX 812P ACTIVE SPEAKER 2000W, 12'', 136dB removeRCF ART 422-A Active speaker system 12" + 2", 400W remove
Image
SKULDGT12AVP 7212/95DPCE005631E005225SRX 812PART422A
Rating
Price 364.99 incl. GR VAT 4,190.00 incl. GR VAT 370.00 incl. GR VAT 294.00 incl. GR VAT 1,803.89 incl. GR VAT 805.49 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

With its 12" custom woofer and 1" Celestion compression driver complement the GT 12 A active fullrange loudspeaker delivers high definition audio with a peak SPL of 122 dB, 60 Hz - 19 kHz frequency response and 90° x 60° dispersion.

Covered in tough, textured Dura-Vinyl for protection and long-lasting appearance the rugged 15mm MDF bass reflex enclosure integrates a 54° monitor angle, honeycomb pattern steel grille and dual tilt pole mount.

Providing outstanding value, the GT 12 A is powered by a built-in Class D digital amplifier with highly efficient SMPS technology and 1,000 watts peak output. It features XLR and 6.3 mm connectors for line and microphone input, a 2-band EQ and overcurrent and overvoltage protection for reliable operation.

A protective cover is available as accessory.

 

Product number: LDGT12A
Product type: PA loudspeaker
Type: active
Low/mid driver dimensions: 12“
Low/mid driver dimensions (mm): 304.8mm
Woofer magnet: Ferrite
Woofer brand: Custom-made
Woofer voice coil: 2.5“
Woofer voice coil (mm): 63.5mm
Horn: CD horn
HF driver dimensions: 1“
HF driver dimensions (mm): 25.4mm
HF driver magnet: Ferrite
HF driver brand: Celestion
HF driver voice coil: 1“
HF driver voice coil (mm): 25.4mm
Amplifier: Class D
Dispersion (H x V): 90 x 60°
RMS: 250W
Peak power: 1000W
Frequency response: 60 - 19000Hz
Crossover frequency: 2200Hz
Max. SPL (continuous): 119dB
Max. SPL (peak): 122dB
Protection circuits: HF Driver, over-current, over voltage
Input sensitivity: Mic: 150 mV / Line: -10dBu
Controls: Line Gain, Treble, Power, volume, Mic Gain, Bass
Indicators: signal, protect (protection circuit engaged), limit, Power
Line inputs: 1
Line input connectors: 6.3 mm Jack, XLR
Mic inputs: 1, XLR, 6.3 mm Jack
Line outputs: 1
Line output connectors: XLR
Operating voltage: Switching Power Supply, 220 V AC - 240 V AC (Auto), 50 - 60 Hz, 110 V AC - 120 V AC
Cabinet material: 15 mm MDF
Cabinet surface: Dura-vinyl textured paint
Cabinet construction: vented
Monitor angle: 54°
Width: 389mm
Height: 565mm
Depth: 368mm
Features: rugged steel grille, dual-tilt flange (0°/5°)
Weight: 20.7kg

 


Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)

Product Features:
  • High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
  • Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
  • High-performance MP3 player included to play audio files via USB stick
  • “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
  • 2-channel mixer with individual Mic/Line inputs (XLR and 1/4" TRS), Volume controls and Clip LEDs
  • Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
  • state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
  • Ultra-wide dispersion, large-format exponential horn
  • Additional Line output allows linking of additional speaker systems
  • Versatile trapezoidal enclosure design allows different positioning:
  • - Stand mounting with 35-mm pole socket
  • - Tilts on its side for use as a floor monitor
  • Ergonomically shaped handles for easy carrying and setup
  • High-quality components and exceptionally rugged construction ensure long life
User's Manual

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 

 User's Manual

The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems.

Features

    400 Watt digital bi-amplification
    128 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    12" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 12" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 20.2/44.53 kg/lbs

Weight21.00 kg21.30 kg12.50 kg12.30 kg26.00 kg20.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 21.00 kg
Weight 21.30 kg
Weight 12.50 kg
Weight 12.30 kg
Weight 26.00 kg
Weight 20.20 kg